| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| WTB: '93 Era Cobra Outdrive https://www.smwebhead.com/phpBB3/viewtopic.php?f=8&t=14114 |
Page 1 of 1 |
| Author: | LivinnSadley [ Thu Jun 11, 2015 11:55 am ] |
| Post subject: | WTB: '93 Era Cobra Outdrive |
Short and Simple... I blew up mine and need another. 1993 Sundowner 215, 5.0 EFI Cobra Outdrive |
|
| Author: | Jdpber [ Fri Jun 12, 2015 9:06 am ] |
| Post subject: | Re: WTB: '93 Era Cobra Outdrive |
that blows... |
|
| Author: | LouC [ Sun Jun 14, 2015 7:59 am ] |
| Post subject: | Re: WTB: '93 Era Cobra Outdrive |
Jdpber wrote: that blows... Didn't you replace one on your boat? Where did you get it from? |
|
| Author: | 702Steve [ Tue Jun 16, 2015 6:14 pm ] |
| Post subject: | Re: WTB: '93 Era Cobra Outdrive |
My mechanic has one. I'm checking right now to see if he still has it. I will let you know. |
|
| Author: | Jdpber [ Wed Jun 17, 2015 10:17 am ] |
| Post subject: | Re: WTB: '93 Era Cobra Outdrive |
LouC wrote: Jdpber wrote: that blows... Didn't you replace one on your boat? Where did you get it from? yes my upper case.. oh hell... let me look around and see what i can find. it was some reman company google found for me.. i think i gave like $600 shipped for the reman upper. |
|
| Author: | LivinnSadley [ Fri Jun 19, 2015 9:01 am ] |
| Post subject: | Re: WTB: '93 Era Cobra Outdrive |
LouC, I have not replaced it yet. My mechanic just found one for me out in Saybrook. It is probably a saltwater unit but the guy (Jay's Marine) has a good rep. I think the whole outdrive will cost me around $1200. My thought now is that I am going to see if I can get my old outdrive rebuilt. If I can do it fairly cheap I can either swap it back onto my boat and get rid of the replacement or keep the replacement on and get rid of the original. I have a buddy that can weld aluminum if needed. I'm guessing they sell rebuild kits? Ric? My outdrive is in very good condition on the outside so I am hoping it can be fixed and will be worth the $ and time. |
|
| Author: | LouC [ Fri Jun 19, 2015 10:32 am ] |
| Post subject: | Re: WTB: '93 Era Cobra Outdrive |
It depends on your plans for the boat...if you're keeping it a long time then having a spare drive makes sense. I'd take a look at the salt water one; mines been moored in salt nearly 15 seasons worth and has only needed minor repairs (seals, trim lines, still has original upper and lower gears). Id keep your old one and when you have the money get it rebuilt over the winter for a spare. Many parts are still available and what you can't get OE you can get from Sierra.... |
|
| Author: | WhiskeyZulu [ Fri Jun 19, 2015 11:02 am ] |
| Post subject: | Re: WTB: '93 Era Cobra Outdrive |
Heres a Long Island (Lindenhurst) craigslist asking $800:http://longisland.craigslist.org/bpo/5054114923.html Good luck |
|
| Author: | LouC [ Fri Jun 19, 2015 3:32 pm ] |
| Post subject: | Re: WTB: '93 Era Cobra Outdrive |
That's fairly local to me, South Shore Suffolk County. Salt water also. If you are anywhere near Candlewood Lake Ct, there are some boat places up there, maybe someone might have a nice fresh water one. Keep in mind that with the 5.8 engine you need the V-6/V-8 large gearcase (lower) version, not the one for the 2 4 cyl engines that used the smaller gearcase. The 5.8 probably used the same gear ratio as the 5.7 which was 1.41:1. |
|
| Author: | WhiskeyZulu [ Tue Jun 30, 2015 11:46 am ] |
| Post subject: | Re: WTB: '93 Era Cobra Outdrive |
Heres another in Oceanside, LI for a grand - http://newyork.craigslist.org/lgi/boa/5077356558.html #3 -- OMC Cobra Outdrive Model 984542 5.0L Motor Ser#T0526244 $1000.00 No affiliation. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|