www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

need lower unit for 3.0 (4 cyl)
https://www.smwebhead.com/phpBB3/viewtopic.php?f=8&t=14223		 Page 1 of 1
Author:  flyweed [ Tue Jul 07, 2015 1:55 pm ]
Post subject:  need lower unit for 3.0 (4 cyl)
Hey guys..when it rains it pours I guess. I am looking for a GOOD, USED (hopefully) upper and lower unit for a 4 cylinder 3.0L

Let me know if you know of where to look, or if you have an old boat around that might have a lower unit sitting around in good shape.

Thanks
Dan
Author:  GottWhat [ Tue Jul 07, 2015 1:57 pm ]
Post subject:  Re: need lower unit for 3.0 (4 cyl)
OMC, VP, Merc? Which drive? Ratio? Your location? Budget?
Author:  afw200 [ Tue Jul 07, 2015 2:24 pm ]
Post subject:  Re: need lower unit for 3.0 (4 cyl)
GottWhat wrote:
OMC, VP, Merc? Which drive? Ratio? Your location? Budget?



:arrow:
flyweed wrote:
Lou

yes, mine is an OMC Cobra.
Author:  flyweed [ Wed Jul 08, 2015 9:38 am ]
Post subject:  Re: need lower unit for 3.0 (4 cyl)
Yes...it is a omc cobra 3.0L (4 cylinder) engine. My budget. I'd like to stay under $1000. Location is Wisconsin.
Author:  flyweed [ Thu Jul 09, 2015 10:02 am ]
Post subject:  Re: need lower unit for 3.0 (4 cyl)
hoping all the "collective" minds on here will help me locate a good used outdrive (upper and lower). I See a nice used one on ebay for $900, but the guy won't ship. So hoping there might be someone on here, knowing where I can pick one up at a decent price, and get it shipped to me.

again, it'll be going in a 1990 Four Winns 170 Freedom with the 3.0 OMC Cobra engine ( 4 cyl)

Thanks for any and all help.

Dan
Author:  flyweed [ Fri Jul 10, 2015 9:28 pm ]
Post subject:  Re: need lower unit for 3.0 (4 cyl)
:?: :?: :?: :?: :?: Anybody :?: :?: :?: :?: :?: :?:
Author:  GottWhat [ Fri Jul 10, 2015 11:26 pm ]
Post subject:  Re: need lower unit for 3.0 (4 cyl)
http://detroit.craigslist.org/wyn/boa/5117172265.html
Author:  flyweed [ Sun Jul 12, 2015 12:33 pm ]
Post subject:  Re: need lower unit for 3.0 (4 cyl)
Thanks for that lead GotWhat.

I just emailed the guy, hoping he replies. I told him I just needed to be sure it was for a 1990-1993 omc cobra 3.0..as any older and the gear case was smaller.

I asked if he would put it on a pallet and ship it? I'd cover the $950 asking fee, plus shipping and packing charges.

Hope to hear back from him

Dan
Author:  GottWhat [ Sun Jul 12, 2015 7:52 pm ]
Post subject:  Re: need lower unit for 3.0 (4 cyl)
If he doesn't reply, should try giving him a call instead. If he doesn't want to ship it, maybe it might be worth it for you to drive out to Metro Detroit and back. You can do it in a day.
Author:  RotaryRacer [ Mon Jul 20, 2015 9:00 am ]
Post subject:  Re: need lower unit for 3.0 (4 cyl)
Saw this while browsing...

http://nmi.craigslist.org/bpo/5129536980.html
Author:  flyweed [ Mon Jul 27, 2015 11:42 am ]
Post subject:  Re: need lower unit for 3.0 (4 cyl)
GottWhat,

I did indeed call him..and super nice guy. He was willing to work with me...I got the complete outdrive shipped to me for a total cost of $1100 for the complete drive shipped!. The drive is basically in brand new condition. Orignal paint on it, no dings or dents anywhere. Looks great.
Author:  GottWhat [ Mon Jul 27, 2015 12:11 pm ]
Post subject:  Re: need lower unit for 3.0 (4 cyl)
flyweed wrote:
GottWhat,

I did indeed call him..and super nice guy. He was willing to work with me...I got the complete outdrive shipped to me for a total cost of $1100 for the complete drive shipped!. The drive is basically in brand new condition. Orignal paint on it, no dings or dents anywhere. Looks great.

Awesome, let us know how it runs!
Author:  flyweed [ Tue Aug 04, 2015 9:00 am ]
Post subject:  Re: need lower unit for 3.0 (4 cyl)
being installed as we speak. Plus they are are doing a full "tune up" on my engine, new plugs, etc. And my speedometer had stopped working, so they are putting in a new Pitot tube and getting my speedo back up and running. I should have it back by Thursday or Friday this week. Can't wait.
Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/