EvilZ wrote:
It also depends on what you will be replacing it with....
If you replace it with a newer Sony, you may find that the existing connector works just fine.
So true. You can go to Sony's site and look up the old & new decks to see if they match. But I am sure the will.
What I also found in installing my Fusion deck from my Sony is that the color code was the same. Not sure of other makers. What I did was, if I sold the boat (and I did) I wanted to take the Fusion with me & put back the Sony. I cut the wire to the Sony's harness and soldered both harness to the boats wiring system. When I sold the boat, it took about 5 min to put the Sony back in since the harness was already there. Just a thought?