www.iFourWinns.com

Dedicated to Current and Future Owners
It is currently Thu Oct 31, 2024 6:47 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Wed May 27, 2015 8:46 am 
Offline
Guppy

Joined: Tue May 26, 2015 11:27 am
Posts: 6
Location: Ohio
First Post... but been a long time guest and beneficiary of the forum...goes easy on me! :D

Problem - Starboard engine (5.0L Volvo Penta GXiE) stalls when I shift down into idle ONLY when coming off plane; does not matter if goes direct to idle or take 30 seconds. If I "goose" the throttle I can keep it from stalling and all is good; re-starts "hard" if it stalls like it's flooded. Initial starting is also more difficult than Port Engine as it requires giving throttle versus just starting.

History - boat was purchased as a repo with multiple engine issue with both the Port and Starboard. The Starboard was rebuilt due to having a cracked block due to poor Winterizing. Port had to be pulled for starting issues and backfiring; found that previous owner rebuilt as a 5.7L but did not re-flash the ECM (unfortunately found this out after I rebuilt Starboard... :cry: ). This is my second year with the boat and I have been running with Mercury Quickleen to clean the system from sitting for who knows how long....

Thanks for your feedback...

_________________
2008 Vista 358 - 5.7 Inboard V-Drives
2004 Vista 288 - SOLD
2000 Vista 268 - SOLD


Top
 Profile  
 
PostPosted: Thu May 28, 2015 4:58 am 
Offline
Shark

Joined: Wed Dec 24, 2014 9:12 pm
Posts: 149
look up some of the posts on idle control valve - may be that - very common

_________________
----------------------
GI Auz
2004 288 Vista
Twin 4.3 Merc
Image

Previously:
Beneteau 411 Non-Stink


Top
 Profile  
 
PostPosted: Thu May 28, 2015 12:18 pm 
Offline
Guppy

Joined: Tue May 26, 2015 11:27 am
Posts: 6
Location: Ohio
GI Auz wrote:
look up some of the posts on idle control valve - may be that - very common


I have read through some, most recently about tapping on to see if the RPM changes meaning it was sticking and cleaning with Carb Cleaner. Would swapping them between the engines be a way to troubleshoot?

_________________
2008 Vista 358 - 5.7 Inboard V-Drives
2004 Vista 288 - SOLD
2000 Vista 268 - SOLD


Top
 Profile  
 
PostPosted: Fri May 29, 2015 8:35 am 
Offline
Shark

Joined: Wed Dec 24, 2014 9:12 pm
Posts: 149
swapping may be a good trouble shooting technique

_________________
----------------------
GI Auz
2004 288 Vista
Twin 4.3 Merc
Image

Previously:
Beneteau 411 Non-Stink


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 6 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group