www.iFourWinns.com

Dedicated to Current and Future Owners
It is currently Thu Oct 31, 2024 7:08 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 8 posts ] 
Author Message
PostPosted: Mon Apr 11, 2011 8:33 am 
Offline
Sting Ray

Joined: Thu Dec 09, 2010 5:05 pm
Posts: 74
Well, I finally got some decent time-off to get into the boat. One of things I wanted to do was to add a sink to help my wife get ready in the morning, without having to walk to the marina's bathrooms. This will help her wash her face and get herself dolled up before walking by anyone else. I know it bothered her, so a sink was ordered.
Before Image
After Image
Cutting a hole in the side of the boat is always a nerve-wracking thing, but it came out pretty well once I found the matching drain and marked a position where it followed the lines of the hull, not in perfect horizontal alignment.
Image
Drilled another hole for the fill Image
Choosing the spot for the water tank wasn't easy either. I thought of using a flexible tank under one of the cabin seats, but I thought the price was a bit too much. I almost ended up putting the tank under the step into the cabin, but running the pump was just too tight. I finally settled on squeezing it next to the battery on the port side aft behind the door under the seat.
Image

For a refrigerator, I bought the Waeco-Dometic CF-18. It is a real fridge, not a thermoelectric. I can freeze or keep whatever as cold as I need it. I didn't need to give my wife and I food poisoning, so this will keep us safer, in the respect of refrigeration at least. Fits pretty well in front of her seat, and the built-in cooler is the perfect spot to put her foot against. I'll drop in a 12v outlet right next to the cooler to plug it in to.
Image

I chose my spot for shore power inlet to look factory. Not bad. I do still have to hook up the breakers and run the lines to the outlet boxes, but it is getting there.
Image

And finally, I was playing around with the canvases. I was wondering all winter whether they made the two biminis to come together as one when not in use..Yay! They were thinking!
Image
Image

I did hook up the water supply line and turn the key. Took about one second of cranking and it fired to life. Idle was smooth and the engine was amazing quiet from inside the boat. It just whispered. No unsightly sounds. I can't wait to get her in the water next month.

That's it for now. I have another 6 days off, starting this thursday, so I will hopefully get everything else done. Thanks for checking out my progress.

_________________
Image
Gary & Diane
1996 Sundowner 245
Lake Winnipesaukee, NH


Top
 Profile  
 
PostPosted: Mon Apr 11, 2011 8:58 am 
Offline
email admin your custom rank

Joined: Thu Jul 13, 2006 7:45 pm
Posts: 2866
Location: Indiana
Looks good!

_________________
2007 358 T-5.7GXi IB
Previous Boats
'08 H240, '08 V318, '04 268, '04 225


Top
 Profile  
 
PostPosted: Mon Apr 11, 2011 9:26 am 
Offline
email admin your custom rank
User avatar

Joined: Tue Jun 16, 2009 4:17 pm
Posts: 521
Location: Metro Detroit/Holland MI
Excellent job!

Your sink and drain look just like mine that came from the factory. Your water tank is very close to the factory spot as well, they just put it further rearward under the swim platform.

If you ever have any questions about things shoot me a note. Our boats are almost identical.

I might want to get you to take bimini frame (pole) dimensions. Mine was wrecked and I've had a hell of a time getting the bimini tight. New frame is around $600 so If I got some dimensions I could bend up tubing myself.

_________________
Terry
Current: 07 Crownline 255 CCR cuddy - 350 Mag MPI/B3 "Casi Cielo"

Previous:97 245 Sundowner 5.7GI/SX

Tow vehicle: 1986 GMC 2500 Camper Special 454/TH400
Image


Top
 Profile  
 
PostPosted: Mon Apr 11, 2011 10:51 am 
Offline
Shark
User avatar

Joined: Mon Feb 12, 2007 1:20 pm
Posts: 100
Location: ITALY
:shock:
everything looks factory built!!!
:wink:

_________________
2001-268 Vista
"Bailamoren@ 3"
Volvo Penta 5.0 Gi 270 HP duoprop
Image

previous boats:
1998 FW 258 Vista
2003 Saver 690 Cabin Sport


Top
 Profile  
 
PostPosted: Mon Apr 11, 2011 2:13 pm 
Offline
Sting Ray

Joined: Thu Dec 09, 2010 5:05 pm
Posts: 74
97_245_sd wrote:
Excellent job!

Your sink and drain look just like mine that came from the factory. Your water tank is very close to the factory spot as well, they just put it further rearward under the swim platform.

If you ever have any questions about things shoot me a note. Our boats are almost identical.

I might want to get you to take bimini frame (pole) dimensions. Mine was wrecked and I've had a hell of a time getting the bimini tight. New frame is around $600 so If I got some dimensions I could bend up tubing myself.


I was going to try to put it further back in the unused space, but I couldn't find a handy 3 yr. old that was good with a screwdriver and wrench. I just couldn't fit back there...lol. As far as having questions, I thank you. For the bimini, I will try to help you out, but those dimensions would be quite difficult to get perfect. Half are bowed. But, like I said, I would be glad to get as many dimensions as I can for you.
-Gary

_________________
Image
Gary & Diane
1996 Sundowner 245
Lake Winnipesaukee, NH


Top
 Profile  
 
PostPosted: Mon Apr 11, 2011 2:17 pm 
Offline
email admin your custom rank

Joined: Sun Nov 21, 2010 8:03 am
Posts: 2238
Location: Winthrop, Ma.
Looking good!!


Top
 Profile  
 
PostPosted: Tue Apr 12, 2011 2:47 pm 
Offline
Nauti Luv

Joined: Mon Jan 05, 2009 9:55 am
Posts: 2186
Location: Little Elm - Lake Lewisville TX
Great work!

_________________
Current Boat:
2004 Sea Ray 320 Sundancer "Nauti Luvin'"

Previous Boats:
1999 298 Vista "Seas The Day"
2008 H200SS "Nauti Luv"
2006 Tahoe Q4


Top
 Profile  
 
PostPosted: Tue Apr 12, 2011 8:06 pm 
Offline
Sting Ray

Joined: Fri May 15, 2009 7:48 am
Posts: 71
Location: Kingston Ontario
97_245_sd wrote:
Excellent job!

Your sink and drain look just like mine that came from the factory. Your water tank is very close to the factory spot as well, they just put it further rearward under the swim platform.

If you ever have any questions about things shoot me a note. Our boats are almost identical.

I might want to get you to take bimini frame (pole) dimensions. Mine was wrecked and I've had a hell of a time getting the bimini tight. New frame is around $600 so If I got some dimensions I could bend up tubing myself.


FYI...I had a dealer in Canada order me the frame for my 235, had it shipped here with taxes,duty and shipping for about $500 cdn. I thought of making my own too, but for the money it was worth it to buy from Four Winns.

_________________
2000 235 Sundowner
Previously 2007 Horizon 190
2004 Chevy Avalanche Z71


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 16 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group