www.iFourWinns.com

Dedicated to Current and Future Owners
It is currently Thu Oct 31, 2024 6:55 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Bilge Replacement
PostPosted: Thu Jun 14, 2012 12:01 pm 
Offline
Tadpole

Joined: Wed Jun 13, 2012 11:45 pm
Posts: 3
I have a 1997 245 Sundowner 7.1 liter Volvo Penta with a faulty bilge, actually the hose connect is broken off and the auto switch is not working. I cannot find a way to access the pump for service/replacement. My local shop mechanic stated I need to pull the engine to get access which seems extreme. I am handy with a wrench and not excited about spending $1000 on a $100 part. Do any of you have suggestions on access? Is it possible to gain access from the fuel tank area.
Your help and experiance is appreciated.

Brian


Top
 Profile  
 
 Post subject: Re: Bilge Replacement
PostPosted: Thu Jun 14, 2012 12:27 pm 
Offline
email admin your custom rank

Joined: Sun Nov 21, 2010 8:03 am
Posts: 2238
Location: Winthrop, Ma.
There nuts!!!

Best case: Leave the old pump were it is. Install a new one and use the same hose. Use the same wires too, just cut them from the old pump and move them to the new one.

Worst case: Install all new, pump, hose, thur-hull fitting and still use the old wires.


Top
 Profile  
 
 Post subject: Re: Bilge Replacement
PostPosted: Thu Jun 14, 2012 12:40 pm 
Offline
email admin your custom rank
User avatar

Joined: Tue Jun 16, 2009 4:17 pm
Posts: 521
Location: Metro Detroit/Holland MI
what type of seating do you have? My '97 245 has the u-wrap seating, the middle "engine box" of the rear seat unscrews to allow more engine access, although it still isn't great. On my boat there is a vertical bulkhead just in front of the engine and rearward of the fuel tank that I would think is not removeable.

I can see where it is difficult to get under the engine to the pump, but for that kind of bill I would try a headstand with my face down in the bilge to do it myself.

_________________
Terry
Current: 07 Crownline 255 CCR cuddy - 350 Mag MPI/B3 "Casi Cielo"

Previous:97 245 Sundowner 5.7GI/SX

Tow vehicle: 1986 GMC 2500 Camper Special 454/TH400
Image


Top
 Profile  
 
 Post subject: Re: Bilge Replacement
PostPosted: Thu Jun 14, 2012 1:01 pm 
Offline
Tadpole

Joined: Wed Jun 13, 2012 11:45 pm
Posts: 3
Thanks, for the replies. I have the u shape seating as well and I can take them out which helps but it is all engine and the bilge is directly under the motor. I think I will need to take the suggestion of a new relocated replacement bilge.


Top
 Profile  
 
 Post subject: Re: Bilge Replacement
PostPosted: Thu Jun 14, 2012 6:15 pm 
Offline
Nauti Luv

Joined: Mon Jan 05, 2009 9:55 am
Posts: 2186
Location: Little Elm - Lake Lewisville TX
Bilge PUMP

_________________
Current Boat:
2004 Sea Ray 320 Sundancer "Nauti Luvin'"

Previous Boats:
1999 298 Vista "Seas The Day"
2008 H200SS "Nauti Luv"
2006 Tahoe Q4


Top
 Profile  
 
 Post subject: Re: Bilge Replacement
PostPosted: Thu Jun 14, 2012 7:28 pm 
Offline
Tadpole

Joined: Wed Jun 13, 2012 11:45 pm
Posts: 3
You are correct I mis-spoke Bilge PUMP. Not the rounded portion of the boat hull. My Bad :roll:


Top
 Profile  
 
 Post subject: Re: Bilge Replacement
PostPosted: Thu Jun 14, 2012 8:32 pm 
Offline
email admin your custom rank

Joined: Wed Jun 01, 2011 10:21 am
Posts: 5667
Location: Austin, TX
even on my h180 it was nearly impossible to get to but not impossible. Do what my father does, pays his friend's kid $5 to do work he can't reach

_________________
1981 Columbia 8.7
2015 Yamaha FZR - 87mph - sold
2006 Yamaha GP1300R - sold
2003 Chaparral 215 SSI - sold
2009 Stingray 195CS - sold
2000 Four Winns H180 - sold
1976 O'day Daysailer II - sold

Rick's Four Winns H180 Mods/Upgrade Thread


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 30 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group