www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

2001 Horizon 200 Wakeboard Tower Install
https://www.smwebhead.com/phpBB3/viewtopic.php?f=10&t=14326		 Page 1 of 1
Author:  sfm5089 [ Tue Jul 28, 2015 11:31 am ]
Post subject:  2001 Horizon 200 Wakeboard Tower Install
Hello All,

I wanted to add some photos of the tower we added to my boat this year for this upcoming season of wakeboarding. My boat is a 2001 Horizon 200 with 5.7 MPI Mag. The tower that was added was a Aerial Assault power coated gloss black. They kit came with two wakeboarding holders on each side. Also you can tell I added 4 polk audio single bullet speakers on the tower as well. The overall install took sometime but was not overall complex. The speakers needed there own amp which is a MTX 800 watt amp. I used that amp because my speakers in my boat current already use one of those amps. Great products

Image

Image
Author:  Jdpber [ Tue Jul 28, 2015 11:57 am ]
Post subject:  Re: 2001 Horizon 200 Wakeboard Tower Install
if you have actual installation photos i am sure many would be interested.


looks good i like the powder coated black..
Author:  sfm5089 [ Tue Jul 28, 2015 12:09 pm ]
Post subject:  Re: 2001 Horizon 200 Wakeboard Tower Install
Jdpber,


I will try to get the photo's up that I have when we were doing the install. I just went off of Aerial directions which were spot on for sure. The only scary thing is when you have to drill four holes in your boat and then add the backing plates. You only have one shot at this. Overall it took us one full day for the tower install. Now the amp speakers and wiring for the the light on the top of the tower took some thinking. I had to run a wire harness down through the tower which included 10 wires. It got tricky.
Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/