www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
Tube Parts https://www.smwebhead.com/phpBB3/viewtopic.php?f=10&t=7303 |
Page 1 of 1 |
Author: | robbo3 [ Tue Apr 12, 2011 11:34 am ] |
Post subject: | Tube Parts |
I'm curious what anyone does when they have 1/2 of a tube left. For example, I have our first Super Mable cover (the bladder gave out), an Airhead Viper (2-person) cover where I'm unable to repair the tube where it split the seam, and an O'brien Screamer tube (the cover ripped). The Super Mable cover is a little worn, but fully functional. The Viper is like new and was only used a few times over three years. I'd like to clean out stuff I have that isn't usable, but also, if I could make them usable (mostly the Viper), I would do that. I'm no hoarder, but it seems like a waste to just toss them. I've checked into replacement costs for part of the tube and it is close to the full retail price. |
Author: | TSR [ Tue Apr 12, 2011 1:50 pm ] |
Post subject: | Re: Tube Parts |
I also have a Viper 2-person and one of the bladders gave out a couple of years ago. I ordered two new bladders (just the seat sections) through Airhead's customer service dept. and if my memory serves me correctly, they were around $15 each plus shipping. Where did you check into replacement costs? If it was through a dealer, google Airhead (and the others for that matter) and contact them directly. |
Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |