www.iFourWinns.com

Hi all,

I'm wanting to upgrade my spin on filter to something a little better and easier to find than my OMC 502906.
I can't for the life of me find info on the filter and thread size to cross reference it to a Racor system.
I'm chasing something like this and will buy a new Racor alloy head if needed:

http://www.go2marine.com/product/52253F ... 21mam.html

This is what I currently use:
http://www.iboats.com.au/Fuel-Water-Sep ... _id.172231

Any advice is appreciated!

_________________
2011 Four Winns H180 SS.
Aussie built Mustang 2800.
SOLD - 1997 Four Winns Horizon RS

I tried a Racor and while I think they do probably filter better and will handle water better, removing the metal bowl is a big pain. I worried about that o ring leaking as well. So I went back to the Sierras I used for years with no real problems. Save your $$.

_________________
88 Four Winns 200 Horizon
4.3 OMC Cobra-4bbl
2002 Walker Bay 10/2012 Suzuki 2.5
2008 Walker Bay 8

1998 Jeep Grand Cherokee 4.0/Selectrac
2007 Jeep Grand Cherokee 5.7 Hemi/Quadradrive II

Thanks for the advice, Lou.
I've supplied Racor's on heaps of equipment in the past and have only heard good reviews on them.
Sierra is not that common of a brand over here and Racor is readily available and cheap to buy...
Any tips on thread/ filter size?

<edit> Will 30 GPH be sufficient a filter flow rate for my 2BBL Volvo 5.7 GL?

_________________
2011 Four Winns H180 SS.
Aussie built Mustang 2800.
SOLD - 1997 Four Winns Horizon RS