www.iFourWinns.com

Dedicated to Current and Future Owners
It is currently Fri May 02, 2025 5:56 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Tue Jun 08, 2010 9:48 pm 
Offline
Seahorse

Joined: Sat May 30, 2009 10:17 pm
Posts: 28
hey guys i have a 2000 248 vista with 5.0 gi dps drive....my problems.....first the shifter goes quit a distance before it engages in reverse..when going into forward it goes about the same distance before it engages..but in forward it doesnt engage fully but shakes the out drive..i move the shifter just a little more then its fine..any ideas......i had the boat running by the dock....having the shifter looked at.....not funny..i shut the engine down..i had the hatch off ..i heard water trickling ..i couldnt see exactly were the water was coming from but it looked like it was coming from the area where the port side cooling tube hooks up behind the engine...how is it connected back there and can i tighten it some how....thanks

_________________
2000 [img][img][/img][/img]248 vista 5.0 gi dp
orillia ontario canada


Top
 Profile  
 
PostPosted: Tue Jun 08, 2010 10:38 pm 
Offline
email admin your custom rank
User avatar

Joined: Wed Aug 15, 2007 2:22 am
Posts: 795
Location: Melbourne, Australia
Is this a newly acquired boat or one you have had for a while? The reason I ask is that the answers may be different...

1. Shifter problem - cable could be connected to the wrong hole on the shifter (different holes for different engine combos), cable could be somehow stretched, cable could have come loose where the outer attaches to the leg, linkages on the leg may have bent or broke.

2. Water leak - if it's a hose on the engine should be a simple fix once you track it down. If the boat is 10 years old, then likely a few of the hoses are due to be replaced...

_________________
Image

Alec

2006 Horizon 190
VP 4.3GL/SX, Sunsport


Top
 Profile  
 
PostPosted: Tue Jun 08, 2010 11:40 pm 
Offline
Seahorse

Joined: Sat May 30, 2009 10:17 pm
Posts: 28
this is my 3rd summer....i tried to adjust the cable at the shifter the eyelet is turned all the way in on the threads....and i switched holes...still no good..the water is coming from behind the engine about 5 inches away from the transom....i think its the cooling tube that connects back there im not sure what its called that the tube connects too....is there any hoses behind the engine and im wondering if i can tighten the tube some how.....it really tight behind there..thanks

_________________
2000 [img][img][/img][/img]248 vista 5.0 gi dp
orillia ontario canada


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group