www.iFourWinns.com

Finally got to dip it in today. The drives leak really bad when up and in the water. when I put them down it almost stops but still leaks a little. The belows look really new, but don't know whom did them. It sounds like a water fall on both drives evenly when they were up. We can see it coming in around the drive shafts. What do you guys think. Did they do the install wrong the last time? The engines only have 174.6 hrs run time on the ECU's.

_________________
1992 Baja 38 Special Twin 502 Mags

03 Stingray 3.0
88 261 Liberator 460 King Cobras
95 Bayliner 1850 3.0
77 Fiber Form 20ft 350/385hp
70 Wescraft 1800 SS 455 Jet

Lead, Follow, or get the Hell out of the Way!

Unfortunately a quick visual inspection from the outside still leaves a lot of stuff in hiding. Sounds to me like they are ripped or have a hole in them somewhere.

_________________
Brian Borchik
The Winds of Cold Springs Harbor Marina
Baldwinsville, NY

Actually no. I said they are both the same, and if it were a hole, putting the drives down would not help much as well as giving it power would really make them leak. Like I said, there is something missing. It must be to do with the through exhaust that is not used.

_________________
1992 Baja 38 Special Twin 502 Mags

03 Stingray 3.0
88 261 Liberator 460 King Cobras
95 Bayliner 1850 3.0
77 Fiber Form 20ft 350/385hp
70 Wescraft 1800 SS 455 Jet

Lead, Follow, or get the Hell out of the Way!

I will be pulling the drives and sealing it the correct way.

_________________
1992 Baja 38 Special Twin 502 Mags

03 Stingray 3.0
88 261 Liberator 460 King Cobras
95 Bayliner 1850 3.0
77 Fiber Form 20ft 350/385hp
70 Wescraft 1800 SS 455 Jet

Lead, Follow, or get the Hell out of the Way!