| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Leaking Bravo's https://www.smwebhead.com/phpBB3/viewtopic.php?f=11&t=10190 |
Page 1 of 1 |
| Author: | jvthundercat [ Sat Aug 25, 2012 9:07 pm ] |
| Post subject: | Leaking Bravo's |
Finally got to dip it in today. The drives leak really bad when up and in the water. when I put them down it almost stops but still leaks a little. The belows look really new, but don't know whom did them. It sounds like a water fall on both drives evenly when they were up. We can see it coming in around the drive shafts. What do you guys think. Did they do the install wrong the last time? The engines only have 174.6 hrs run time on the ECU's. |
|
| Author: | Borchik [ Mon Aug 27, 2012 6:37 am ] |
| Post subject: | Re: Leaking Bravo's |
Unfortunately a quick visual inspection from the outside still leaves a lot of stuff in hiding. Sounds to me like they are ripped or have a hole in them somewhere. |
|
| Author: | jvthundercat [ Tue Aug 28, 2012 8:00 pm ] |
| Post subject: | Re: Leaking Bravo's |
Actually no. I said they are both the same, and if it were a hole, putting the drives down would not help much as well as giving it power would really make them leak. Like I said, there is something missing. It must be to do with the through exhaust that is not used. |
|
| Author: | jvthundercat [ Sat Sep 15, 2012 7:48 am ] |
| Post subject: | Re: Leaking Bravo's |
I will be pulling the drives and sealing it the correct way. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|