| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Need a fuel line https://www.smwebhead.com/phpBB3/viewtopic.php?f=11&t=11781 |
Page 1 of 1 |
| Author: | dbuesing [ Wed Jun 12, 2013 9:05 pm ] |
| Post subject: | Need a fuel line |
Can anyone tell me where i can get a new fuel line? Everywhere i look says the one I need is obsolete. 1995 omc cobra is what i need it for. |
|
| Author: | NiagaraChillin [ Thu Jun 13, 2013 7:03 am ] |
| Post subject: | Re: Need a fuel line |
First off, read this, it will help us, help you: http://www.smwebhead.com/phpBB3/viewtopic.php?f=9&t=11652 As far as fuel line, what part of it do you need? From tank to pump, pump to carb? Metal/rubber? |
|
| Author: | dbuesing [ Thu Jun 13, 2013 4:52 pm ] |
| Post subject: | Re: Need a fuel line |
NiagaraChillin wrote: First off, read this, it will help us, help you: http://www.smwebhead.com/phpBB3/viewtopic.php?f=9&t=11652 As far as fuel line, what part of it do you need? From tank to pump, pump to carb? Metal/rubber? Ok got my profile set up! As far as the fuel line, I need from pump to carb. It has a metal one now but I would rather have a flexible line if possible. Either way I cant seem to find one. |
|
| Author: | Winter Sux [ Thu Jun 13, 2013 6:29 pm ] |
| Post subject: | Re: Need a fuel line |
With a flaring tool and a tube bender, they are super simple to make. Any local shop, auto or marine can do it. I recommend using copper tubing. |
|
| Author: | ric [ Thu Jun 13, 2013 6:32 pm ] |
| Post subject: | Re: Need a fuel line |
Can't find rubber fuel line? Every automotive store has fuel line sold by the foot. |
|
| Author: | dbuesing [ Thu Jun 13, 2013 6:58 pm ] |
| Post subject: | Re: Need a fuel line |
Winter Sux wrote: With a flaring tool and a tube bender, they are super simple to make. Any local shop, auto or marine can do it. I recommend using copper tubing. I called local automotive store and the guy says you have to double flare the tube because the fuel line has a seam in it. Made it seem like u had to have special tools other than a flaring tool. |
|
| Author: | Winter Sux [ Thu Jun 13, 2013 8:11 pm ] |
| Post subject: | Re: Need a fuel line |
Flaring tools do single and double. It's common knowledge in the trade. That's why I recommended a local auto or marine shop. Not your local parts joint. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|