Thanks a million, fellas!
| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| T-Stat to Manifold Hoses https://www.smwebhead.com/phpBB3/viewtopic.php?f=11&t=12470 |
Page 1 of 1 |
| Author: | deafwish [ Fri Nov 08, 2013 3:20 pm ] |
| Post subject: | T-Stat to Manifold Hoses |
Hey all, I've tried searching the net but can't find the answer... Might anyone know the hose diameter of the thermostat housing to exhaust manifold hose? This is the part in question: http://www.marineengine.com/newparts/pa ... OMC3852746 Cheers. |
|
| Author: | rpengr [ Fri Nov 08, 2013 4:20 pm ] |
| Post subject: | Re: T-Stat to Manifold Hoses |
Here is the markings on my Thermostat Housing to Exhaust Manifold hoses: 3/4" 19.1mm SAE 20R3 Made in USA Goodyear Ray |
|
| Author: | Winter Sux [ Fri Nov 08, 2013 6:31 pm ] |
| Post subject: | Re: T-Stat to Manifold Hoses |
For the record it's 3/4 inch inside diameter. If you're looking to save money, simply buy some 3/4 inch heater hose and use these. http://www.gates.com/brochure.cfm?broch ... on_id=5348 I use them with heater hose to replace the expensive crankcase breather pipes. |
|
| Author: | deafwish [ Sat Nov 09, 2013 7:09 pm ] |
| Post subject: | Re: T-Stat to Manifold Hoses |
Thanks a million, fellas!
|
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|