| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Racor Cross Referencing https://www.smwebhead.com/phpBB3/viewtopic.php?f=11&t=12963 |
Page 1 of 1 |
| Author: | deafwish [ Sat May 31, 2014 8:49 pm ] |
| Post subject: | Racor Cross Referencing |
Hi all, I'm wanting to upgrade my spin on filter to something a little better and easier to find than my OMC 502906. I can't for the life of me find info on the filter and thread size to cross reference it to a Racor system. I'm chasing something like this and will buy a new Racor alloy head if needed: http://www.go2marine.com/product/52253F ... 21mam.html This is what I currently use: http://www.iboats.com.au/Fuel-Water-Sep ... _id.172231 Any advice is appreciated! |
|
| Author: | LouC [ Sat May 31, 2014 9:03 pm ] |
| Post subject: | Re: Racor Cross Referencing |
I tried a Racor and while I think they do probably filter better and will handle water better, removing the metal bowl is a big pain. I worried about that o ring leaking as well. So I went back to the Sierras I used for years with no real problems. Save your $$. |
|
| Author: | deafwish [ Sun Jun 01, 2014 12:02 am ] |
| Post subject: | Re: Racor Cross Referencing |
Thanks for the advice, Lou. I've supplied Racor's on heaps of equipment in the past and have only heard good reviews on them. Sierra is not that common of a brand over here and Racor is readily available and cheap to buy... Any tips on thread/ filter size? <edit> Will 30 GPH be sufficient a filter flow rate for my 2BBL Volvo 5.7 GL? |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|