www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
Replacement Lower Drive Pivot drain plugs https://www.smwebhead.com/phpBB3/viewtopic.php?f=11&t=1386 |
Page 1 of 1 |
Author: | Finisher [ Thu Nov 01, 2007 4:44 pm ] |
Post subject: | Replacement Lower Drive Pivot drain plugs |
I give up, I've used a few of the online part number finders to find the right part number for the pivot drain plug for my 88 OMC 5.0L Cobra. I've ordered 2 now, one too big and one too small!!! How hard can this be?? Can anyone help? Thanks! OP |
Author: | LouC [ Thu Nov 01, 2007 7:38 pm ] |
Post subject: | Re: Replacement Lower Drive Pivot drain plugs |
I checked the Doug Russell site and the part # for the plug is 3852536 and the o-ring is 0911311, is that what you ordered? I've ordered parts before from them and usually the right stuff came in. |
Author: | Finisher [ Tue Mar 11, 2008 3:27 pm ] |
Post subject: | Re: Replacement Lower Drive Pivot drain plugs |
Lou C- Thanks for responding to my many posts, I've even seen your name pop up on Iboats posts too. In any case, you can see I left this little problem for the next season. I did a search on Doug Russell today and wasn't able to find either numebr you listed below. i must be jinxed! ha, I called them and the guy's system froze! You just have to laugh. I'll let you know what I find out. Crazy! OP |
Author: | LouC [ Tue Mar 18, 2008 9:16 pm ] |
Post subject: | Re: Replacement Lower Drive Pivot drain plugs |
You could also try Crowley Marine, their website is easier to use, I usually call Russell and can order stuff without trouble. Failing that if you have a dealer that sells Evinrudes they can order OMC parts from BRP. |
Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |