Make sure you really want to take it off, it sucks a big one. The entire fuel injection module needs to be removed or slid backwards to get the arrestor off. I had to take the fuel injection apart to get mine off. The entire design is ridiculous. First step is to remove the throttle cable from the injector. Next, if you lift up the flame arrestor, you'll see 3 bolts, can't remember the size. They need to be removed, but DO NOT drop them down into the intake. Place the arrestor back down in it's normal place. The base of the injector has 4 bolts that hold it in place. You can only see 3 of them. If you lift up the top half of the injector that you just unbolted, you will find the 4th. All 4 of these bolts need to come off. Next you need to remove the fuel lines in the back of the fuel injection. You should now be able to slide the entire injection module back enough to pull the flame arrestor off. Fun right! Good Luck,
_________________ Lakebum2006 378 Vista Nashville, TN Current 04 Hustler Cheetah 06 Seadoo sportster 150 Past 06 378 vista 328 vista 240 horizon 21' glastron 20' celebrity
|