www.iFourWinns.com

Dedicated to Current and Future Owners
It is currently Sun Nov 10, 2024 2:39 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
PostPosted: Wed Feb 03, 2016 7:44 pm 
Offline
Seahorse

Joined: Mon Aug 18, 2014 6:29 pm
Posts: 22
Location: Ohio
Has any one here replace the carrier assembly in their Bravo 1? Was out doing some work on the boat getting it ready in hopes of an early spring and noticed that I have what appears to be gear oil on either side of the skeg, appears to be coming from behind the prop somewhere. I had an issue last year (2014) with the mechanic having trouble getting the lower drain plug out and am thinking that the same happened this past fall (2015) and maybe the carrier assembly got damaged in the process. Regardless I am in the process of finding a new marine mechanic, the place I use is the only option in town and have been around for a long time but they do not do good quality work (bilge was full of oil and water after having the oil changed in engine) and I always feel like they don't really care about their customers.


Top
 Profile  
 
PostPosted: Wed Feb 03, 2016 9:08 pm 
Offline
email admin your custom rank

Joined: Thu Sep 04, 2014 10:12 am
Posts: 632
Location: Ontario
Could be a prop shaft seal. I this happen on a Bravo 3 a few years ago.

_________________
2004 - 288 Vista
Twin - 5.0 Volvo Penta GXi DP

Image


Top
 Profile  
 
PostPosted: Wed Feb 03, 2016 9:30 pm 
Offline
Seahorse

Joined: Mon Aug 18, 2014 6:29 pm
Posts: 22
Location: Ohio
alex8q4 wrote:
Could be a prop shaft seal. I this happen on a Bravo 3 a few years ago.

Is this something that the average idiot like me could check? I am keeping my fingers crossed that it is something cheaper than replacing the entire lower unit.

I am leaning heavily toward something being wrong with the carrier/plug since they had issues getting it out previously. I didn't have it in me to pull the prop off and investigate today, like I said previously more than a little angry with the shop here. :evil:


Top
 Profile  
 
PostPosted: Thu Feb 04, 2016 8:02 am 
Offline
email admin your custom rank

Joined: Thu Sep 04, 2014 10:12 am
Posts: 632
Location: Ontario
When you take the prop off look to see if the oil is leaking at the prop shaft itself. I believe it is a Teflon seal that keeps the oil from draining out around the shaft. This is a wear item and it is a relatively common repair.

The seal itself is not expensive, but The job required a special tool, and I'm not one to open up a gear case. I had a local shop do it and the cost was not too bad.

_________________
2004 - 288 Vista
Twin - 5.0 Volvo Penta GXi DP

Image


Top
 Profile  
 
PostPosted: Thu Feb 04, 2016 10:42 am 
Offline
email admin your custom rank

Joined: Mon Jun 02, 2014 7:24 pm
Posts: 618
Location: Lake St. Clair USA
You can find digital copies (.pdf) of the Merc Bravo service manuals online. Very useful for troubleshooting issues and determining if it is a job you would want to tackle yourself.

If you cannot find a copy, send me a PM with your email address.

_________________
NEW - 2000 Cobalt 246 w/454 Magnum 385HP | SOLD - 2000 FW Horizon 180 LS w/5.0Gi 250HP Volvo Penta

Image


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: Google [Bot] and 33 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group