www.iFourWinns.com

Dedicated to Current and Future Owners
It is currently Sat Apr 27, 2024 6:06 pm

View unanswered posts | View active topics


Board index » Care and feeding » Engine, Drive, Prop

All times are UTC - 6 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 3 posts ] 
  Print view Previous topic | Next topic 
Author Message
AlexJ
 Post subject: Throttle operation
PostPosted: Sun Jun 19, 2016 8:03 pm 
Offline
email admin your custom rank

Joined: Sun May 28, 2006 9:33 pm
Posts: 368
Location: Lake Orion, Michigan
When you disconnect the throttle cable at the carb, how does the linkage move on the carb? Does the linkage return to idle via spring tension when not connected to the throttle cable? If it does and it doesn't do it, is there a spring tension adjustment?

_________________
Alexj

Image

1995 Four Winns Horizon 190
OMC 5.0 RL
Top
 Profile  
 
rpengr
 Post subject: Re: Throttle operation
PostPosted: Sun Jun 19, 2016 10:54 pm 
Offline
email admin your custom rank

Joined: Sun Jul 22, 2012 5:10 pm
Posts: 2032
Location: West Palm Beach, FL
All the carbs I've seen have a light spring returning them to idle if the throttle cable was disconnected. This functions to take up any slack in the connections, and also for safety to return to idle if the linkage came apart. No tension adjustment...If it doesn't work, the spring must be broken.

_________________
Image
"Knot Easy" 2000 Horizon 240 Volvo 5.7GS /SX
tow: 2017 Honda PILOT EXL-AWD
prev. boats:
'87 Chaparral 198CXL 4.3 OMC Cobra
'69 Jetstar 16ft Ski Boat, 115hp Yamaha
'68 Aluminum Jon Boat, 3hp Sears
'64 Water Wings
Top
 Profile  
 
AlexJ
 Post subject: Re: Throttle operation
PostPosted: Mon Jun 20, 2016 8:22 am 
Offline
email admin your custom rank

Joined: Sun May 28, 2006 9:33 pm
Posts: 368
Location: Lake Orion, Michigan
I thought that was the case. No spring on the linkage. I'll get one and put it on to see how it works. Thanks

_________________
Alexj

Image

1995 Four Winns Horizon 190
OMC 5.0 RL
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 3 posts ] 

Board index » Care and feeding » Engine, Drive, Prop

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 28 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group