www.iFourWinns.com

Dedicated to Current and Future Owners
It is currently Sun Apr 28, 2024 4:28 am

View unanswered posts | View active topics


Board index » Care and feeding » Engine, Drive, Prop

All times are UTC - 6 hours [ DST ]



Post new topic Reply to topic  Page 3 of 3
  [ 35 posts ]  Go to page Previous  1, 2, 3
  Print view Previous topic | Next topic 
Author Message
rgoals2win
 Post subject: Re: It's gone
PostPosted: Wed Mar 22, 2017 1:58 am 
Offline
Starfish
User avatar

Joined: Sun Jul 21, 2013 1:45 am
Posts: 57
Location: Temecula, CA
I use Mercury or QuickSilver filters. Aways wondered, frankly, what the difference is since Mercury owns QuickSilver brand, as far as I know.

Seemed like the thing to do since I was putting in their 25W-40 anyway.

While I am terribly curious as to whether or not marine oils are different from automotive, I highly doubt that filters are different. Just convenient to buy at the same time.

_________________
2004 Four Winns 234 Funship


Tow Vehicle: 2005 Ford F-250 V10 4x4 Supercrew
1992 Sea Ray 200 - Sold
Top
 Profile  
 
LouC
 Post subject: Re: It's gone
PostPosted: Wed Mar 22, 2017 6:07 am 
Offline
email admin your custom rank

Joined: Thu Jun 29, 2006 10:26 pm
Posts: 5662
Location: Long Island NY
Sierra says the anti corrosion process is different (this is also true for the fuel filters) and in a salt water environment this is a big deal. I've never had a marine filter rust in 15 years of salt water moorage & use.

_________________
88 Four Winns 200 Horizon
4.3 OMC Cobra-4bbl
2002 Walker Bay 10/2012 Suzuki 2.5
2008 Walker Bay 8

1998 Jeep Grand Cherokee 4.0/Selectrac
2007 Jeep Grand Cherokee 5.7 Hemi/Quadradrive II
Top
 Profile  
 
Technologic80
 Post subject: Re: It's gone
PostPosted: Wed Mar 22, 2017 8:25 pm 
Offline
email admin your custom rank

Joined: Fri May 26, 2006 3:18 pm
Posts: 642
Location: Lake St. Clair, Michigan
deafwish wrote:
Technologic80 wrote:
This year I am using..... <gasp> full synthetic Shell Rotella T6 5w/40 in my twin 4.3 engines :shock: :)


I'd love to see an oil analysis report targeting viscosity if you're pouring a 5w40 in there! :shock:
Oils with a large viscosity range use a large amount of VI Improvers, which shear at a faster rate.
This is why Mercruiser still use their 25w40.
I'd personally never use anything thinner than a 15w40 in any marine application.
It's still >30c down in Australia & I'm currently using a high ZDDP, 20w60! 8)


I researched it ad nauseum, spent a lot of time reading on Bob is the Oil Guy forums...many UOA's showing it is extremely shear resistant. A lot of people using it in their diesel engines, hot rods, and boat engines because of this. Normally I wouldn't go lower than a 10w40 (exception: my one run with HD diesel 10w30)...

_________________
1997 Four Winns Vista 278
T - 4.3l EFI
Kohler 4esz Genset
379 hours as of 8/8/21
Top
 Profile  
 
rgoals2win
 Post subject: Re: It's gone
PostPosted: Fri Mar 24, 2017 1:05 am 
Offline
Starfish
User avatar

Joined: Sun Jul 21, 2013 1:45 am
Posts: 57
Location: Temecula, CA
LouC wrote:
Sierra says the anti corrosion process is different (this is also true for the fuel filters) and in a salt water environment this is a big deal. I've never had a marine filter rust in 15 years of salt water moorage & use.


Funny thing is, I was looking up filters to buy last night for the boat and saw a similar line to what you just noted, Lou. Might as well be conservative and use the corrosion resistant design. Not enough savings to worry about going cheaper.

Thank you, Lou...!

Bob

_________________
2004 Four Winns 234 Funship


Tow Vehicle: 2005 Ford F-250 V10 4x4 Supercrew
1992 Sea Ray 200 - Sold
Top
 Profile  
 
LouC
 Post subject: Re: It's gone
PostPosted: Fri Mar 24, 2017 6:26 am 
Offline
email admin your custom rank

Joined: Thu Jun 29, 2006 10:26 pm
Posts: 5662
Location: Long Island NY
You're welcome!
In a fresh water area with a boat kept on the traiker not so much of a concern but a moored boat like mine in salt water with a bit of water always in the bilge you always need to keep ahead of corrosion...

_________________
88 Four Winns 200 Horizon
4.3 OMC Cobra-4bbl
2002 Walker Bay 10/2012 Suzuki 2.5
2008 Walker Bay 8

1998 Jeep Grand Cherokee 4.0/Selectrac
2007 Jeep Grand Cherokee 5.7 Hemi/Quadradrive II
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 3 of 3
  [ 35 posts ]  Go to page Previous  1, 2, 3

Board index » Care and feeding » Engine, Drive, Prop

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 17 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group