www.iFourWinns.com

Dedicated to Current and Future Owners
It is currently Thu Mar 28, 2024 10:18 am

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 1 post ] 
Author Message
PostPosted: Thu May 31, 2018 11:31 am 
Offline
Goldfish

Joined: Wed Jul 22, 2015 7:31 pm
Posts: 31
2008 318, Merc 350 Mag MPI

Last year I got the three beeps on the port engine. Tech found a bad water pressure sensor which was clogged with mud. Not having one on hand, he swapped it with a used one in his shop, cleared the fault and sent me on my way. Everything has been fine since.

Until, I just installed VesselView and can actually see all the readings. The intake pressure on the port engine is 4psi at idle, 6psi at speed. The stbd is in the 40-50psi range. Still, no alarm and both engines run at perfect temperature. Any ideas what's going on here? I know it's worthwhile to change the port sensor for a new one, but if the pressure is so low, why would I not get an alarm or not be overheating?

_________________
2008 V318

Image

previous:
2001 248 Vista


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 1 post ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 8 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group