www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
Distributor cap wire pattern volvo penta 4.3L https://www.smwebhead.com/phpBB3/viewtopic.php?f=11&t=16000 |
Page 1 of 1 |
Author: | davepip71 [ Fri Jun 15, 2018 6:17 am ] |
Post subject: | Distributor cap wire pattern volvo penta 4.3L |
So I was on the water last weekend and all of a sudden the motor wouldn't pull more than 2300 RPMs and was running rough. After some looking, found that the distributor cap had lost a tab and wasn't screwing in place. So bought new cap and rotor. My issue is stupidity. I completely forgot to mark the locations of plug wires. I know the firing sequence but can't seem to figure out how each location relates to the distributor cap. Can somebody provide a diagram? Driving me crazy. Thank you much in advance. |
Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |