+!. I have the Merc 3.0 and the same issue- Watching paint dry.
| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| VP lower unit lub replacement https://www.smwebhead.com/phpBB3/viewtopic.php?f=11&t=1737 |
Page 1 of 1 |
| Author: | scottmph [ Tue Apr 15, 2008 3:50 pm ] |
| Post subject: | VP lower unit lub replacement |
is it just me or is it painfully slow replacing the gear oil? am i doing something wrong or is there a better way? It took nearly all day to get 2 liters in and have 1/2 to go - or so.... like watching grass grow. thanks |
|
| Author: | Rob [ Tue Apr 15, 2008 4:08 pm ] |
| Post subject: | Re: VP lower unit lub replacement |
+!. I have the Merc 3.0 and the same issue- Watching paint dry.
|
|
| Author: | 230 Mike [ Tue Apr 15, 2008 4:24 pm ] |
| Post subject: | Re: VP lower unit lub replacement |
Slow draining or slow filling? Do you have the dip stick and vent plug out? |
|
| Author: | BrentC5Z [ Tue Apr 15, 2008 4:38 pm ] |
| Post subject: | Re: VP lower unit lub replacement |
What Mike said. Also, are you pumping it in from the bottom until it comes out the vent? |
|
| Author: | scottmph [ Tue Apr 15, 2008 4:47 pm ] |
| Post subject: | Re: VP lower unit lub replacement |
Brent87LT1 wrote: What Mike said. Also, are you pumping it in from the bottom until it comes out the vent? no that would make sense, I did as per manual. slow going on the refill end using gravity. Will try pumping up next time. one half to go |
|
| Author: | Rob [ Tue Apr 15, 2008 5:07 pm ] |
| Post subject: | Re: VP lower unit lub replacement |
Rob wrote: +!. I have the Merc 3.0 and the same issue- Watching paint dry. Oops. Miss read i think.. Filing is o.k but slow draining. 
|
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|