Here’s the problem I can’t trim up the boat while underway.
I can trim fine while setting still but when I am on plane and trying to put the boat into trim, the trim pump will pop its circuit breaker (located on the side of the pump) every time. I push the breaker back in and trim works again as long as I am not moving (up on plane, idling around seems to cause no problems). Checked fluid level and all is good. It is a 94 OMC Cobra 5.0L, otherwise in excellent condition.
Any ideas?
Thanks in advance!
_________________
Troy
2008 Centurion Avalanche
1994 Four Winns Horizon 180 SE 5.0L OMC Cobra (Sold)
2002 Ford F150 Harley Davidson Edition (
http://www.nhtoc.com) 378 hp & 465 tq at rear wheels
2008 Honda Accord EX-L w/Nav