With repsect to greasing of those components, since you have to remove the drive to inspect for water intrusion anyway, it should be a yearly job regardless of hours. You want to check the gimble bearing to make sure it turns easily and the u-joints for binding. I built a stand out of wood with casters underneath it to make removing the Cobra easier.
_________________ 88 Four Winns 200 Horizon 4.3 OMC Cobra-4bbl 2002 Walker Bay 10/2012 Suzuki 2.5 2008 Walker Bay 8
1998 Jeep Grand Cherokee 4.0/Selectrac 2007 Jeep Grand Cherokee 5.7 Hemi/Quadradrive II
|