www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
temp gauge calibration https://www.smwebhead.com/phpBB3/viewtopic.php?f=11&t=23760 |
Page 1 of 1 |
Author: | skidaddytn [ Tue Apr 26, 2022 11:30 pm ] |
Post subject: | temp gauge calibration |
My temperature gauge still works, but it is way off... Its a simple old style analog gauge on an '07 H200. Problem is, it shows 140-150 when cold, then goes to 190-200 at normal running temp. Exhaust manifolds feel normal once warmed up. Everything seems fine, I would just like to make this more realistic somehow. Anyone know of a way to do this? |
Author: | chevymaher [ Thu Apr 28, 2022 6:36 am ] |
Post subject: | Re: temp gauge calibration |
New sending unit. |
Author: | skidaddytn [ Sun May 08, 2022 10:45 pm ] |
Post subject: | Re: temp gauge calibration |
For the curious, I tried this once before and it didn't work, but today it did. Hit the gauge with knuckles while cruising and the offset dropped off. It's the gauge. |
Author: | skidaddytn [ Wed Jun 21, 2023 11:19 pm ] |
Post subject: | Re: temp gauge calibration |
Again, for the curious, I opted to remove my 4 gauge cluster and utilize Faria Beade's repair service. It was just under $150 and they got it done faster than was quoted and mailed it back to me. Additionally, it looked brand new when I got it back! I installed it, and everything is working awesome again. I definitely recommend their service-- I opted this route so I could still keep the Four Winns OEM'd logo design rather than buying a new one which almost matches. Couldn't be happier! |
Author: | LouC [ Sun Jun 25, 2023 4:06 am ] |
Post subject: | Re: temp gauge calibration |
Glad to hear their repair service works well. I still have the 35 year old Medallion gauges in my old '88 H-200 and they all still work (including the trim gauge but to keep that working I replace the sensor every 5 or so seasons). A few years after this pic was taken I repaired both the speedo (just cleaned out the hose) and the low reading voltmeter (wiring issue) pic must be about 10 years old! https://www.dropbox.com/s/2htblj2p8idua ... s.JPG?dl=0 |
Author: | skidaddytn [ Mon Jun 26, 2023 10:21 pm ] |
Post subject: | Re: temp gauge calibration |
Nice LouC! I must admit, you are the master at keeping older craft working! |
Author: | LouC [ Wed Jun 28, 2023 2:31 pm ] |
Post subject: | Re: temp gauge calibration |
Thanks, I actually prefer older simpler tech like carburetors and points distributors, parts are easy to find, repairs aren't hard when you know how these archaic systems work. I look at modern I/O boats and between poor access for repairs, expensive to repair EFI, cat converter exhaust, sky high parts prices for everything be it Merc or V/P and CANBUS wiring, I say no thanks. Like you used to see on the back of a TV set "no user serviceable parts inside" |
Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |