www.iFourWinns.com

Dedicated to Current and Future Owners
It is currently Fri May 02, 2025 1:42 pm

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 12 posts ] 
Author Message
PostPosted: Sun Aug 24, 2008 11:19 am 
Offline
Goldfish

Joined: Sun Aug 24, 2008 9:44 am
Posts: 32
Location: Vermont
I just purchased a 1995 Freedom 170 with the 4.3 and Volvo outdrive. I would like to do some of the basic maintenance work on this boat myself, but since I got no documentation with the boat, I don't really know where to start. How can I find out filter parts numbers, oil weights, general procedures, etc.?

Thanks in advance.

_________________
1995 Four Winns Freedom 170
4.3-GL, Volvo SX


Top
 Profile  
 
PostPosted: Sun Aug 24, 2008 11:21 am 
Offline
Narwhal
User avatar

Joined: Mon Feb 26, 2007 10:29 am
Posts: 1035
Location: Chicago, IL
Owners manuals and specs are available online from Four Winns and Volvo.

http://www.fourwinns.net/fastfacts/index.html

http://www.volvo.com/volvopenta/global/en-gb/marine_leisure_engines/

_________________
2007 Horizon 200
4.3L GXi/ SX 225 HP


Top
 Profile  
 
PostPosted: Sun Aug 24, 2008 2:04 pm 
Offline
Goldfish

Joined: Sun Aug 24, 2008 9:44 am
Posts: 32
Location: Vermont
Thank you for the help.

However, I suppose I should have been more specific, as when I mean specifications, I mean like oil capacity for the engine and weight, what the filters parts numbers are, spark plug information (gap, etc). This information is not in the owners manual or the specifications for my boat, and that's what I'm specifically trying to find out.

As a general piece of information, am I stuck ordering all parts through a FW dealer or is there another source that I can go to? For example, I assume that certain parts off of land-based 4.3 engines won't work on the marine engine, but it seems that other parts would be the same. I'm not looking to save money necessarily, it's just that there are no boat dealers anywhere around here.

_________________
1995 Four Winns Freedom 170
4.3-GL, Volvo SX


Top
 Profile  
 
PostPosted: Sun Aug 24, 2008 2:09 pm 
Offline
230 Mike
User avatar

Joined: Mon May 15, 2006 7:59 pm
Posts: 5141
Location: Kansas City, Table Rock Lake
There are a few really good online sources for engine & drive parts.

http://www.dougrussell.com
http://www.helmutsmarine.com

There are others that I can't think of at the moment. If you call Doug Russell and ask for tech support, they may be able to get you those part numbers & specs you're looking for. I'd think they'd be in the documentation available on the Volvo web site, but maybe they don't have it that far back.

_________________
Image

Mike
2005 Four Winns 230/240
VP 5.7GXi/DP
1998 F-150 XLT
Boat Pic


Top
 Profile  
 
PostPosted: Sun Aug 24, 2008 6:05 pm 
Offline
Goldfish

Joined: Wed Jul 16, 2008 1:47 pm
Posts: 35
Location: Oakville, Ontario, Canada
You can get a Seloc service manual for you engine/drive combo:

http://www.selocmarine.com/product_finder.php

This will give you all the info you will need to work on your engine/drive

And you can get the engine/drive parts from any VP dealers.

As for other boat equipment , you can either order it from FW directly or if it was a 3rd party item installed at the factory by FW you can probably order from them directly or through their dealer network. For example FW may have install Bennett trim tabs on your boat, but you can get Bennett trim tab parts at most marine stores like West Marine.

_________________
"Kokomo"
2006 Four Winns Vista 318


Top
 Profile  
 
PostPosted: Mon Aug 25, 2008 1:20 pm 
Offline
Goldfish

Joined: Wed Jun 07, 2006 5:35 pm
Posts: 33
Location: Marion, Iowa
Since it's a Volvo you can go to the Volvo online store. It's at http://www.volvopentastore.com/
I find that by the time I pay shipping it comes out about even with buying through my dealer, but I don't know if that is true for all areas of the country and all dealers.

_________________
"No Losses"


Top
 Profile  
 
PostPosted: Mon Aug 25, 2008 7:34 pm 
Offline
Goldfish

Joined: Sun Aug 24, 2008 9:44 am
Posts: 32
Location: Vermont
Can I use the Volvo store for engine parts even though the engine still says OMC?

How can I find out what model outdrive it has?

_________________
1995 Four Winns Freedom 170
4.3-GL, Volvo SX


Top
 Profile  
 
PostPosted: Mon Aug 25, 2008 7:46 pm 
Offline
email admin your custom rank
User avatar

Joined: Mon Jun 25, 2007 11:00 pm
Posts: 384
My outdrive info was on a little metal plate on the Right valve cover (as looking at the engine) next to the carb.
you can see it in the pic next/below the Red Oil fill cap.
Image

_________________
Troy
2008 Centurion Avalanche
1994 Four Winns Horizon 180 SE 5.0L OMC Cobra (Sold)
2002 Ford F150 Harley Davidson Edition (http://www.nhtoc.com) 378 hp & 465 tq at rear wheels
2008 Honda Accord EX-L w/Nav


Top
 Profile  
 
PostPosted: Tue Aug 26, 2008 11:35 am 
Offline
Goldfish

Joined: Sun Aug 24, 2008 9:44 am
Posts: 32
Location: Vermont
Does anyone know the:

oil weight for engine
fuel filter part number
oil filter
spark plug part number

This is the info I am missing.

_________________
1995 Four Winns Freedom 170
4.3-GL, Volvo SX


Top
 Profile  
 
PostPosted: Tue Aug 26, 2008 11:54 am 
Offline
Goldfish

Joined: Sun Aug 24, 2008 9:44 am
Posts: 32
Location: Vermont
Also, why is the distributor cap rotor 45 bucks through Volvo? everything else on their store seems to be about what I would expect and comparable to automotive parts but that one part is considerably more expensive. It is about 7 dollars through another online retailer...

_________________
1995 Four Winns Freedom 170
4.3-GL, Volvo SX


Top
 Profile  
 
PostPosted: Tue Aug 26, 2008 6:32 pm 
Offline
email admin your custom rank
User avatar

Joined: Wed Aug 15, 2007 2:22 am
Posts: 795
Location: Melbourne, Australia
Probably because the Volvo one is USCG approved...?

_________________
Image

Alec

2006 Horizon 190
VP 4.3GL/SX, Sunsport


Top
 Profile  
 
PostPosted: Wed Aug 27, 2008 7:47 pm 
Offline
Goldfish

Joined: Sun Aug 24, 2008 9:44 am
Posts: 32
Location: Vermont
Aussie_Horizon_190 wrote:
Probably because the Volvo one is USCG approved...?


That's what I figured but at the site it is listed as a replacement for the Volvo part number on Volvos site. That's what threw me.

_________________
1995 Four Winns Freedom 170
4.3-GL, Volvo SX


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 13 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group