| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| 1995 sx m trim cylinder leak down help please https://www.smwebhead.com/phpBB3/viewtopic.php?f=11&t=23873 |
Page 1 of 1 |
| Author: | ron3033 [ Fri Aug 30, 2024 9:57 am ] |
| Post subject: | 1995 sx m trim cylinder leak down help please |
Hi 1995 200 Horizon SX M drive. Trim cylinders leak down. I have a new kit with the one piece seals for piston. I have a adjustable 2 leg pin spanner for cap bolts. 1. Can this be done on the boat? Or would the be issue trying to undo the cap bolts? 2. I saw Chris Bruno fix on youtube, but his rams have the eyelets on the back end of out drive welded on, mine appear to be threaded on. 3. If the eyelet stays on just unscrew piston nut of, catching all the balls & springs, pull cap off to replace seal, wiper seal and o ring be okay? 4. How do you hold the rods so they do not get marred to tight/loose parts? 5. Do cap threads need a sealant? I am in an area where no reputable service annam really stuck and need some help please. ron3033 |
|
| Author: | ron3033 [ Sun Sep 08, 2024 9:51 pm ] |
| Post subject: | Re: 1995 sx m trim cylinder leak down help please |
New style seal kit picture. https://postimg.cc/hhSydC30 |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|