www.iFourWinns.com

Dedicated to Current and Future Owners
It is currently Thu May 01, 2025 9:28 am

View unanswered posts | View active topics


Board index » Care and feeding » Engine, Drive, Prop

All times are UTC - 6 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 2 posts ] 
  Print view Previous topic | Next topic 
Author Message
ron3033
PostPosted: Fri Aug 30, 2024 9:57 am 
Offline
Minnow

Joined: Wed Sep 12, 2012 12:32 pm
Posts: 16
Hi
1995 200 Horizon SX M drive. Trim cylinders leak down. I have a new kit with the one piece seals for piston. I have a adjustable 2 leg pin spanner for cap bolts.
1. Can this be done on the boat? Or would the be issue trying to undo the cap bolts?
2. I saw Chris Bruno fix on youtube, but his rams have the eyelets on the back end of out drive welded on, mine appear to be threaded on.
3. If the eyelet stays on just unscrew piston nut of, catching all the balls & springs, pull cap off to replace seal, wiper seal and o ring be okay?
4. How do you hold the rods so they do not get marred to tight/loose parts?
5. Do cap threads need a sealant?

I am in an area where no reputable service annam really stuck and need some help please.

ron3033
Top
 Profile  
 
ron3033
PostPosted: Sun Sep 08, 2024 9:51 pm 
Offline
Minnow

Joined: Wed Sep 12, 2012 12:32 pm
Posts: 16
New style seal kit picture.

https://postimg.cc/hhSydC30
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 2 posts ] 

Board index » Care and feeding » Engine, Drive, Prop

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 5 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group