This is what I use
I've put a female garden hose end on the tube. It attaches tightly to the oil dipstick. Tricliest part was increasing he tube size to fit on the garden hose end barb.
| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| How do you change your oil? https://www.smwebhead.com/phpBB3/viewtopic.php?f=11&t=251 |
Page 1 of 1 |
| Author: | njlarry609 [ Mon Jul 17, 2006 11:13 am ] |
| Post subject: | How do you change your oil? |
Have not yet found a satisfactory way to remove the old oil. The marina pro vacuum pump was a disastor!! So many connectors to get the size of the tubing needed that twice I spilled oil. You'd think they would make it without all those connectors. Pumped and pumped and only got two quarts out! Is there a oil changer that screws directly to the dip stick fitting? |
|
| Author: | jvalich [ Mon Jul 17, 2006 12:10 pm ] |
| Post subject: | |
This is what I use
I've put a female garden hose end on the tube. It attaches tightly to the oil dipstick. Tricliest part was increasing he tube size to fit on the garden hose end barb. |
|
| Author: | dalew [ Wed Jul 19, 2006 7:28 am ] |
| Post subject: | |
Larry, If you have a mercruiser, the answer is a hose that bolts up the drain plug. You run the hose out the bilge, uncap it, and viola. You can do some searches on http://www.boatingABC.com, or http://www.trailerboats.com. There has been a lot of discussion on this very topic. Good Luck! D |
|
| Author: | njlarry609 [ Wed Jul 19, 2006 3:14 pm ] |
| Post subject: | |
Thanks a lot....the ABC site was great. Seems the trick is to connect to the hose fitting on the dipstick instead of fishing a small tube trough the dip stick holder. |
|
| Author: | 230 Mike [ Wed Jul 19, 2006 8:20 pm ] |
| Post subject: | |
Oil? |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|