My bravo 1 drive will not now go to the downward position; it started acting up about a month ago where it would get stuck here and there, but i suspected the trim gauge and was going to get the servicing dealer to have alook at at the next service. A few days ago i after having the boat layed up for about ten days when i was on holiday, we launched and the admiral went to park the truck i could only get the trim down about 1/8 from the top, i kept trying moving it up and down without luck, the admiral came back to the boat i was about to tell her we would have to put it back on the trailer, i was still working the trim and sudenly it started to go down bit by bit, so we went out for the day all remained well, the next day we launched again and the trim got stuck again but with a few ups and downs we got it down, went out but when we went to go home we could not get the trim down at the beach but after a while up and down we got it down. Two days later we are due to launch again but decide to try the trim before we go will not move even a fraction, checked fluid in the resivior seems OK. The hardest thing i have ever had to do was tell the family we where not going boating today
. Has anybody got any ideas on the fix, any help would be appreciated.