www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
Oil type, and what do you use?? https://www.smwebhead.com/phpBB3/viewtopic.php?f=11&t=2801 |
Page 1 of 1 |
Author: | JeffK [ Mon Feb 02, 2009 11:38 am ] |
Post subject: | Oil type, and what do you use?? |
I called 1 VP dealer, and he said they just use Mobile 1. So what should I use? I just did my vehicles with Mobil1 5-30. I like Mobil1. I guess I could Use Mobil1 30 Any reason not to? VP oil at another dealer was $9.10/qt. |
Author: | 230 Mike [ Mon Feb 02, 2009 11:42 am ] |
Post subject: | Re: Oil type, and what do you use?? |
I use Mobil 1 in everything I own that has an engine. Except the boat, which gets the VP 30 wt. synthetic. |
Author: | 07H200SS [ Mon Feb 02, 2009 11:58 am ] |
Post subject: | Re: Oil type, and what do you use?? |
I use the VP oil as well, but buy it here online cheaper. http://www.marinepartsexpress.com/index.html |
Author: | JeffK [ Mon Feb 02, 2009 12:22 pm ] |
Post subject: | Re: Oil type, and what do you use?? |
Yes, oil is cheaper online, but shipping is a KILLER. With Marine parts express, it would be $10.09qt. |
Author: | 07H200SS [ Mon Feb 02, 2009 12:57 pm ] |
Post subject: | Re: Oil type, and what do you use?? |
I thought I got free shipping on my last oreder? Maybe I spent enough money? Can't remember. |
Author: | jvalich [ Mon Feb 02, 2009 3:07 pm ] |
Post subject: | Re: Oil type, and what do you use?? |
Used Mobil 1 10-30 ever since new. Never any issues in 475 hrs. |
Author: | JeffK [ Mon Feb 02, 2009 3:21 pm ] |
Post subject: | Re: Oil type, and what do you use?? |
Any difference from 10w-30 and just 30w?? |
Author: | LouC [ Mon Feb 02, 2009 10:52 pm ] |
Post subject: | Re: Oil type, and what do you use?? |
I'm using Chevron Delo 400 straight 30 in my old '88 4.3, holds oil pressure well and no issues. OMC specified straight 30 for normal temps, now we have the new Merc stuff that is 25/40 that might even be better, but on this old engine I'll stick with what worked. On the difference between 10W-30 and straight 30, the former will give better cold starting, but the latter will hold its viscosity when hot better, esp if we are talking dino and not full syn oils. In fact my OMC manual specifically recommends against mult vis oils in general. |
Author: | Cap'n Morgan [ Tue Feb 03, 2009 11:35 am ] |
Post subject: | Re: Oil type, and what do you use?? |
Straight 30W, non synthetic in all the boats I have owned. |
Author: | JeffK [ Wed Feb 11, 2009 10:39 am ] |
Post subject: | Re: Oil type, and what do you use?? |
I didn't see any Mobil1 30w, so I got the Mobil1 0W-30, Same? We'll see. |
Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |