www.iFourWinns.com

Can anyone tell me an easy way to hook up a shop tach
to a 2002 5.0 gl volvo penta in a 190 Horizon.

There's not enough room to get to the back of the tachometer
to hook a lead up. Should the whole dash come off or each gauge
separately ? There are 2 screws in the dash but taking them out
really doesn't loosen anything.
I think the other choice is the coil but there isn't any wire exposed.
It's a snap on connection.
Is there some other way I am missing ? Thanks.

_________________
2002 Horizon 190 5.0gl

If your dash is this style, I have at least 4 if not 6 screws that hold the gage cluster in. Once screws have been removed, whole thing falls forward and you will be able to get to each gage.

_________________
2000 248 5.7L DP
'92, '94 SXI 750, '08 STX 15F, '12 Ultra LX 300
Videos

powellcrazy,

Yeah, that's what mine looks like it should do. But I take
the 2 screws out ( near top )and the cluster is just as tight. I don't really
want to take a crowbar to it until I'm sure what's gonna come out.

_________________
2002 Horizon 190 5.0gl