www.iFourWinns.com

Hi,

can anyone give me step by step intructions on how to put a new belt on my 8.1L VP engine.


Thanks

_________________


Peter

2005 four winns sundowner
8.1L VP 375hp
http://s254.photobucket.com/albums/hh117/4winns/

I can't provide specifics for the boat but can give some general instuctions based on automotive belts. My engine still has the old style v-belts.

There should be a belt tensioner that has a square pocket for a 1/2 inch drive ratchet. Using the ratchet to relieve the tension, slip the belt off and let the tensioner back into position. The tricky part is remembering the belt routing. Taking a picture and having a print handy might help. Most cars now have a sticker with the routing to help.

I don't know about the sea water pump that is crank driven on the new engines.

_________________
Terry
Current: 07 Crownline 255 CCR cuddy - 350 Mag MPI/B3 "Casi Cielo"

Previous:97 245 Sundowner 5.7GI/SX

Tow vehicle: 1986 GMC 2500 Camper Special 454/TH400

The hoses on the raw water pump will need to be removed in order to remove/ replace the belt ( alternatively, the water pump cover could be removed, but it's more work)

Graham