www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

Sx to Dp out drive conversion
https://www.smwebhead.com/phpBB3/viewtopic.php?f=11&t=4842
Page 1 of 1

Author:  AlexJ [ Sun Nov 22, 2009 10:44 am ]
Post subject:  Sx to Dp out drive conversion

Anyone ever do this? Convert their out drive from an SX to a dual Prop?

Author:  cougarcruiser [ Sun Nov 22, 2009 12:55 pm ]
Post subject:  Re: Sx to Dp out drive conversion

typically becomes cost prohibitive unless you get find one gently used.

It's done all the time - usually on 'repowers' though.

Author:  230 Mike [ Sun Nov 22, 2009 4:25 pm ]
Post subject:  Re: Sx to Dp out drive conversion

The only difference is the bottom half of the drive. Plus a new set of props of course. But it shouldn't be a difficult thing to do.

Author:  AlexJ [ Mon Nov 23, 2009 9:26 am ]
Post subject:  Re: Sx to Dp out drive conversion

Thanks guys.

Author:  ht32bsx115 [ Mon Nov 23, 2009 3:26 pm ]
Post subject:  Re: Sx to Dp out drive conversion

Alex,

Have a look on EBAY. I see those DP "lowers" there from time to time.......some new and some rebuilt/used etc....


Regards,


Rick

Author:  powellcrazy [ Mon Nov 23, 2009 7:09 pm ]
Post subject:  Re: Sx to Dp out drive conversion

http://www.marinepartsexpress.com/vp_outdrives.htm

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/