| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Prop Polish https://www.smwebhead.com/phpBB3/viewtopic.php?f=11&t=5174 |
Page 1 of 1 |
| Author: | Obie [ Thu Mar 04, 2010 6:07 pm ] |
| Post subject: | Prop Polish |
I recently purchased a spare set of Volvo stainless steel duo props for my upcoming trip to Lake Powell. I always liked bright and shinny stainless prop and was a little disappointed with the Volvo finish. So I went through the boat stuff and found a container of Meguiar's Heavy Duty Oxidation Remover I had left over from my previous boat. I put a 5-inch cloth buffing wheel on the electric drill and went to work. In about 30 minutes and half a container of polish, I had the F3s looking like mirrors. Not a tough job, but very messy with oxidation remover flying off the buffing wheel. If you are looking for some easy boat bling it is relatively easy to do. |
|
| Author: | Jafo4U [ Fri Aug 05, 2011 4:52 am ] |
| Post subject: | Re: Prop Polish |
Great info mine are brand new but I am glad to know if needed they can be made to look new again. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|