Technologic80 wrote:
Same thing my mechanic told me. Replacing the exhaust bellow makes no sense. Now if the u-joint bellows starts leaking, then that requires immediate attention....
Oh trust me, it will get your attention
| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| bellow quetion https://www.smwebhead.com/phpBB3/viewtopic.php?f=11&t=8362 |
Page 1 of 1 |
| Author: | 03svtcobra [ Thu Sep 08, 2011 8:05 pm ] |
| Post subject: | bellow quetion |
i recently purchased a 1994 190 horizon with a 5.0l and a cobra drive. while flushing my motor out this weekend i noticed that the exhaust bellow is leaking. my question is how hard is it to pull the drive? while i am there should i do all of them? is there anything else i should replace or do while the drive is off? what is a reputable parts company for omc parts? any help is greatly appreciated. Shawn |
|
| Author: | 230 Mike [ Thu Sep 08, 2011 10:30 pm ] |
| Post subject: | Re: bellow quetion |
Some of the exhaust bellows "leak" intentionally. You might want to make sure of what you have before you go to all the trouble. |
|
| Author: | ric [ Thu Sep 08, 2011 11:20 pm ] |
| Post subject: | Re: bellow quetion |
if it's leaking past the transom, who cares. water isn't going to come in, and it's not going to affect performance. |
|
| Author: | Technologic80 [ Fri Sep 09, 2011 1:48 pm ] |
| Post subject: | Re: bellow quetion |
Same thing my mechanic told me. Replacing the exhaust bellow makes no sense. Now if the u-joint bellows starts leaking, then that requires immediate attention.... |
|
| Author: | ric [ Fri Sep 09, 2011 2:44 pm ] |
| Post subject: | Re: bellow quetion |
Technologic80 wrote: Same thing my mechanic told me. Replacing the exhaust bellow makes no sense. Now if the u-joint bellows starts leaking, then that requires immediate attention.... Oh trust me, it will get your attention
|
|
| Author: | boater50 [ Fri Sep 09, 2011 8:24 pm ] |
| Post subject: | Re: bellow quetion |
Yeah, I noticed the same thing this spring......went to my mechanic who said there is a slit in the bottom of the exhaust bellows which lets water out while on a hose......I had never noticed before I guess! |
|
| Author: | 03svtcobra [ Mon Sep 12, 2011 3:57 pm ] |
| Post subject: | Re: bellow quetion |
thanks everyone for the info |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|