| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Anodes https://www.smwebhead.com/phpBB3/viewtopic.php?f=11&t=8778 |
Page 1 of 1 |
| Author: | naumovski [ Thu Feb 02, 2012 6:40 pm ] |
| Post subject: | Anodes |
  Ok i bought my boat from man who used it in salt water and i have no idea what material are anodes made from?I am boating only in fresh water and i need to change the drive anodes but my question is: Which material should i use in fresh water aluminium,zinc,magnesium? I read about this on more pages but now i am more confused i dont understand anything about the anodes... Sorry for maybe bad english.. Thank YOu.. |
|
| Author: | Partycove2 [ Thu Feb 02, 2012 7:45 pm ] |
| Post subject: | Re: Anodes |
Magnesium for fresh water |
|
| Author: | Borchik [ Fri Feb 03, 2012 7:02 am ] |
| Post subject: | Re: Anodes |
As Partycove said, Mg for fresh water, Aluminum is used in salt. Zinc works in fresh and salt but not as well as the ones you should use. |
|
| Author: | EvilZ [ Fri Feb 03, 2012 9:32 am ] |
| Post subject: | Re: Anodes |
Salt water/Brackish = Zinc Fresh = Magnesium Salt/Brackish/Fresh = Aluminum |
|
| Author: | Paul I. [ Fri Feb 03, 2012 2:48 pm ] |
| Post subject: | Re: Anodes |
EvilZ wrote: Salt water/Brackish = Zinc Fresh = Magnesium Salt/Brackish/Fresh = Aluminum True, but is also depend on the outdrive too. Call Bob at Boat zinc's - http://www.boatzincs.com/ Tell him what you have & were you are boating. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|