www.iFourWinns.com

Dedicated to Current and Future Owners
It is currently Tue May 14, 2024 9:50 am

All times are UTC - 6 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Fri May 25, 2007 9:21 pm 
Offline
AGE < LOA

Joined: Tue Mar 13, 2007 8:53 pm
Posts: 739
Hi Fellas,

I just finished putting the motor back together from doing the manis, risers, circ pump, impeller and thermostat replacement. I put the muffs on and fired the motor up for the first time since I bought the boat. Started right up. But I noticed a lot of water coming out at the bottom of the gimbal housing. I'm not sure if it's normal there is also water coming from the prop outlet. Just curious your thoughts here.

5.0 Gi DPS


Top
 Profile  
 
 Post subject:
PostPosted: Fri May 25, 2007 11:15 pm 
Offline
McLovin

Joined: Tue Aug 29, 2006 2:09 am
Posts: 241
when you are asking about the gimbal housing you mean the base of the outdrive where it bolts to the transom correct? If so then no there is not supposed to be water coming out of there. You may have a hose not hooked up.

_________________
Four winns 180 horizon


Top
 Profile  
 
 Post subject:
PostPosted: Sat May 26, 2007 12:49 am 
Offline
230 Mike
User avatar

Joined: Mon May 15, 2006 7:59 pm
Posts: 5141
Location: Kansas City, Table Rock Lake
Actually, while I'm not a drive expert, I think water just comes out all over the place on some DP models. I'm pretty sure mine does that too.

_________________
Image

Mike
2005 Four Winns 230/240
VP 5.7GXi/DP
1998 F-150 XLT
Boat Pic


Top
 Profile  
 
 Post subject:
PostPosted: Sat May 26, 2007 7:58 am 
Offline
Mental Floss

Joined: Mon May 22, 2006 3:46 pm
Posts: 919
Location: Lakeland, FL
Water should come out at the transom shield as well as the prop on an SX as they are thru hub exhaust (providing they exhaust bellows is installed, Regal did not installl one on my friends 190 bowrider).

What you don't want is water getting into the drive shaft bellows. That will ruin you gimbal quickly and you just might see some water coming from the gimbal inside the engine space.

_________________
Jvalich
http://www.badcock.com

'04 FW 288 Vista "Mental Floss"


Top
 Profile  
 
 Post subject:
PostPosted: Sat May 26, 2007 8:17 am 
Offline
Shark

Joined: Fri May 26, 2006 10:06 am
Posts: 107
Location: south jersey
No water comes out of the hub on my SX. The hose looks attached and flexes with drive. It that a problem? I thought maybe at idle there's not enough flow/pressure to send water to the hub as it all came out the exhaust bellows vent openings??

_________________
'96 Horizon 200
"Have fenders...will raft"


Top
 Profile  
 
 Post subject:
PostPosted: Sat May 26, 2007 9:39 am 
Offline
AGE < LOA

Joined: Tue Mar 13, 2007 8:53 pm
Posts: 739
Ok thanks all. It appears to be normal but I wanted to check b/c the volvo factory manual suggests replacing bellows and clamps every second year. I'm not sure if that's been done on mine so it had me thinking. It also says to lube the gimbal housing and uv joints every season. Probably something I'll go ahead and do in a few weeks.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 6 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 52 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group