| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Impeller question https://www.smwebhead.com/phpBB3/viewtopic.php?f=11&t=9494 |
Page 1 of 1 |
| Author: | Rick180 [ Thu Jun 07, 2012 1:14 pm ] |
| Post subject: | Impeller question |
Hi I recently bought a Sierra impeller for my 2004 H180 4.3 GL-D. I've always bought the Volvo-Penta impellers before, but this Sierra one came with a little rubber disc that seems to fit nicely on one end of the impeller. This didn't come with the Volvo-Penta. What's it for? I'm guessing that this impeller fits many applications, and some of those need it, whereas mine doesn't.   Thanks, Rick |
|
| Author: | aguyindallas [ Thu Jun 07, 2012 3:03 pm ] |
| Post subject: | Re: Impeller question |
Interesting....I am wondering if the disc is simply a piece of flashing that made it through the molding and packaging process. |
|
| Author: | Graham R [ Thu Jun 07, 2012 5:11 pm ] |
| Post subject: | Re: Impeller question |
My original VP impellor had one,! I really don't know if they do anything, I change the impellor every 2 years, some kits come with the disc, some don't ; so I fit them one year and not the next. Nothing like a bit of variety. |
|
| Author: | Sanmiam [ Fri Jun 08, 2012 10:25 am ] |
| Post subject: | Re: Impeller question |
Graham R wrote: My original VP impellor had one,! I really don't know if they do anything, I change the impellor every 2 years, some kits come with the disc, some don't ; so I fit them one year and not the next. Nothing like a bit of variety. My VP impeller came with one as well, but there was not one on the impeller I replaced. After spending a couple of minutes trying to figure out the engineering involved in necessitating it and any disadvantages I said "screw it" and shoved it on there. No problems yet. |
|
| Author: | boater50 [ Fri Jun 08, 2012 7:27 pm ] |
| Post subject: | Re: Impeller question |
yeah, me too. replaced my volvo impellor last month with a Sierra--same thing...Sierra didn't have one, so the guy at the parts counter just pulled out the old one and placed it on the new one--said it's just kind of acts like a bushing against the impellor cover. He said it was ok if it wasn't there, but he put it on anyway....at leats it'll keep some water away from the shaft....... |
|
| Author: | Rick180 [ Sat Jun 09, 2012 7:18 pm ] |
| Post subject: | Re: Impeller question |
Yeah, I called Sierra directly and spoke to one of the Techs. He said it was just a bushing that goes over the impeller shaft next to the housing cover. Why you'd need to do this, I don't know. I left it off, since it wasn't too tight a fit. It probably would never happen and I don't see how it could, but didn't want to take a chance that somehow it did come loose and worked its way into the cooling system and clogging it ("...the Titanic is unsinkable!!"). Thanks for all the replies. Rick |
|
| Author: | Graham R [ Sun Jun 10, 2012 4:13 am ] |
| Post subject: | Re: Impeller question |
I never really thought about it much. Yes, it's a loose fit and when things ar OK it does nothing. Wasn't there though a batck of impellors a few years ago where the central splined metal bit came loose from the rubber impellor ? If that jappened, I imagine the metal piece could ride outwards on the pump shaft and score/ write off the pump housing. With the disc in place, there would be no damage if that happened. Damage limitation design by VP ? |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|