| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Belt Removal https://www.smwebhead.com/phpBB3/viewtopic.php?f=11&t=9778 |
Page 1 of 1 |
| Author: | Cmeason [ Mon Jul 09, 2012 7:20 pm ] |
| Post subject: | Belt Removal |
I have 07 Horizon 4.3. I am replacing my belt. Looks like I need to remove two hoses from the pump, but there is metal tube next to the hoses that needs to br disconnected as well. Can someone tell me what this is and best way to remove it! |
|
| Author: | Cmeason [ Mon Jul 09, 2012 8:29 pm ] |
| Post subject: | Re: Belt Removal |
Is it a brace of some sort? |
|
| Author: | Aussie_Horizon_190 [ Tue Jul 10, 2012 6:10 pm ] |
| Post subject: | Re: Belt Removal |
The brace you are looking at stops the raw water pump from spinning around. To replace the belt, undo the raw water pump housing on the front of the lower pulley (4 x 3/8" bolts) and remove by pulling forward off the brace (you dont need to remove the 2 hoses). You can then replace your belts. This housing contains the raw water impeller. If it hasn't been changed in the last couple of years, then now may be a good time to replace it as you already have it apart and the bulk of the work is done. |
|
| Author: | Cmeason [ Wed Jul 11, 2012 2:30 pm ] |
| Post subject: | Re: Belt Removal |
Thanks for the help! |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|