www.iFourWinns.com

Does anyone know what length leaf springs are used on the trailers that Four Winns uses? Are they standard? I have a 2002 214 Funship tandem axle with 3500lb axles.
4 leafs, double eye, 1.75" wide, but how long? 25 1/8", 27", other?

I broke a leaf, and am going to replace all the suspension components and would like to order it all up before ripping into it.

19 year old trailer (galvanized) that I dip in salt water frequently - pretty good longevity, but I probably should have replaced it all years ago...

Thanks!

_________________
2002 Funship 214
VP 5.7 GX Si
2003 Tahoe

Take a look at www.easternmarine.com www.trailerpartsdepot.com
or www.etrailer to see what sizes match up

_________________
88 Four Winns 200 Horizon
4.3 OMC Cobra-4bbl
2002 Walker Bay 10/2012 Suzuki 2.5
2008 Walker Bay 8

1998 Jeep Grand Cherokee 4.0/Selectrac
2007 Jeep Grand Cherokee 5.7 Hemi/Quadradrive II

Thanks Lou - I did that with eTrailer, and came up with the 2 different lengths. Eastern Marine has even more options.

I think I'll have to disassemble one side to get take off and measure the unbroken one.

And this time, I'll probably do your bearing grease/Boeshield T-9 routine.

Erik

_________________
2002 Funship 214
VP 5.7 GX Si
2003 Tahoe

If you can jack up the trailer so that the load is off the springs on one side you might be able to get the actual length. On my single axle I have a 5 leaf spring 26” long on each side that are rated for about 2800 lbs each. If you really want em to last you can paint em with a couple coats of rustolium first then coat with grease. Constantly have to stay ahead of salt water!

_________________
88 Four Winns 200 Horizon
4.3 OMC Cobra-4bbl
2002 Walker Bay 10/2012 Suzuki 2.5
2008 Walker Bay 8

1998 Jeep Grand Cherokee 4.0/Selectrac
2007 Jeep Grand Cherokee 5.7 Hemi/Quadradrive II