www.iFourWinns.com

Dedicated to Current and Future Owners
It is currently Thu May 01, 2025 1:57 pm

View unanswered posts | View active topics


Board index » Care and feeding » Trailer and Towing

All times are UTC - 6 hours [ DST ]



Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 
  Print view Previous topic | Next topic 
Author Message
Txjole
PostPosted: Fri Apr 27, 2007 8:36 am 
Offline
email admin your custom rank
User avatar

Joined: Mon Mar 05, 2007 12:32 pm
Posts: 178
Location: Dallas Texas
I went to grease my 06 trailer last night and one of the Accu-lube zerk fitting is sheared off :?: . Any one have a break-down of this hub.
Top
 Profile  
 
230 Mike
 Post subject:
PostPosted: Fri Apr 27, 2007 9:09 am 
Offline
230 Mike
User avatar

Joined: Mon May 15, 2006 7:59 pm
Posts: 5141
Location: Kansas City, Table Rock Lake
Man! How did that happen? It's under warranty, I'd let the dealer take care of it. I'm sure it's just a standard zerk, but getting what's left of the old one out might be a trick.

This is probably the closest thing to a parts breakdown you'll find:

http://www.fourwinns.net/partbook/2006/ ... DO200VT/06

_________________
Image

Mike
2005 Four Winns 230/240
VP 5.7GXi/DP
1998 F-150 XLT
Boat Pic
Top
 Profile  
 
Txjole
 Post subject:
PostPosted: Fri Apr 27, 2007 9:42 am 
Offline
email admin your custom rank
User avatar

Joined: Mon Mar 05, 2007 12:32 pm
Posts: 178
Location: Dallas Texas
230 Mike wrote:
Man! How did that happen? It's under warranty, I'd let the dealer take care of it. I'm sure it's just a standard zerk, but getting what's left of the old one out might be a trick.

This is probably the closest thing to a parts breakdown you'll find:

http://www.fourwinns.net/partbook/2006/ ... DO200VT/06


Yeah I got that already. I rather just fix it in my shop its some much easier. I'm past my 1 year i'm on my extended warranty now so it $50 each time I make a claim.
Top
 Profile  
 
230 Mike
 Post subject:
PostPosted: Fri Apr 27, 2007 10:07 am 
Offline
230 Mike
User avatar

Joined: Mon May 15, 2006 7:59 pm
Posts: 5141
Location: Kansas City, Table Rock Lake
Well, the easiest thing to do might be to take the zerk out of the other hub so you can just buy one to match it. Any hardware store should have it.

_________________
Image

Mike
2005 Four Winns 230/240
VP 5.7GXi/DP
1998 F-150 XLT
Boat Pic
Top
 Profile  
 
willidg
 Post subject:
PostPosted: Fri Apr 27, 2007 10:19 am 
Offline
Starfish

Joined: Fri Apr 13, 2007 10:37 am
Posts: 51
Location: Ann Arbor, MI
Yea, an E-Z out and pick one up at the hardware store should be good.

_________________
2006 Four Winns horizon 200
Top
 Profile  
 
Txjole
 Post subject:
PostPosted: Fri Apr 27, 2007 11:44 am 
Offline
email admin your custom rank
User avatar

Joined: Mon Mar 05, 2007 12:32 pm
Posts: 178
Location: Dallas Texas
problem is I need the piece the zerk screws into.
Top
 Profile  
 
willidg
 Post subject:
PostPosted: Fri Apr 27, 2007 12:15 pm 
Offline
Starfish

Joined: Fri Apr 13, 2007 10:37 am
Posts: 51
Location: Ann Arbor, MI
There is an exploded view of the hub assembly in the trailer section of the owner’s manual. It’s not the best and no part numbers but better then nothing I guess.
Top
 Profile  
 
230 Mike
 Post subject:
PostPosted: Fri Apr 27, 2007 1:05 pm 
Offline
230 Mike
User avatar

Joined: Mon May 15, 2006 7:59 pm
Posts: 5141
Location: Kansas City, Table Rock Lake
So you need to replace the spindle? That is not a DIY job by any stretch of the imagination, unless you've been welding trailer axles for a few years. Maybe I'm misunderstanding...

_________________
Image

Mike
2005 Four Winns 230/240
VP 5.7GXi/DP
1998 F-150 XLT
Boat Pic
Top
 Profile  
 
Txjole
 Post subject:
PostPosted: Fri Apr 27, 2007 1:24 pm 
Offline
email admin your custom rank
User avatar

Joined: Mon Mar 05, 2007 12:32 pm
Posts: 178
Location: Dallas Texas
230 Mike wrote:
So you need to replace the spindle? That is not a DIY job by any stretch of the imagination, unless you've been welding trailer axles for a few years. Maybe I'm misunderstanding...


No the zerk screws in a bushing that encases the bearing. I need that bushing.
Top
 Profile  
 
230 Mike
 Post subject:
PostPosted: Fri Apr 27, 2007 1:30 pm 
Offline
230 Mike
User avatar

Joined: Mon May 15, 2006 7:59 pm
Posts: 5141
Location: Kansas City, Table Rock Lake
OK. FW must have started using a *totally* different spindle setup in '06 than what they had been using the several years before that. Sorry I couldn't help more.

_________________
Image

Mike
2005 Four Winns 230/240
VP 5.7GXi/DP
1998 F-150 XLT
Boat Pic
Top
 Profile  
 
Txjole
 Post subject:
PostPosted: Mon Apr 30, 2007 7:52 am 
Offline
email admin your custom rank
User avatar

Joined: Mon Mar 05, 2007 12:32 pm
Posts: 178
Location: Dallas Texas
OK its offical my trailer is a POS!! Four Winns needs to stick with making boats and let trailer makers make the trailers. My guides are breaking off, zerk in the hub is broke and this weekend my crank sheared and rounded the gears (sad part is was done by a 100lbs chic).
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 11 posts ] 

Board index » Care and feeding » Trailer and Towing

All times are UTC - 6 hours [ DST ]

Who is online

Users browsing this forum: No registered users and 10 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group