| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| 2013 four winns trailer https://www.smwebhead.com/phpBB3/viewtopic.php?f=12&t=11635 |
Page 1 of 1 |
| Author: | colinj1 [ Tue May 28, 2013 4:17 am ] |
| Post subject: | 2013 four winns trailer |
I have a 2012 24 ft funship which I have towed twice both times I've towed the hub holding the bearing oil has come loose / off completly has anyone else had this issue and how did you fix issue |
|
| Author: | TX H210SS [ Tue May 28, 2013 11:22 pm ] |
| Post subject: | Re: 2013 four winns trailer |
Glad to say no...was it a new cap the second go round? You may try the after market see thru caps. I've been wanting to get those anyway.....sounds like a mess. |
|
| Author: | TX H210SS [ Tue May 28, 2013 11:26 pm ] |
| Post subject: | Re: 2013 four winns trailer |
I will say that my wheels were not balanced from factory though and wore my tire tread down.....possible that bouncing may contribute due to vibration...maybe. see if you have early signs of cupping in tread. If no weights on wheel you want that corrected even if not the culprit |
|
| Author: | blue dragon [ Wed May 29, 2013 6:08 am ] |
| Post subject: | Re: 2013 four winns trailer |
I swapped out the tires that came on my trailer after they cracked. I got the tires balanced then, because the ones that came on the trailer were definitely not balanced. I also went through a set of caps, Make sure you don't over tighten, or under tighten. If you over tighten, you will strip the plastic threads, if you under tighten, the rubber seal will let some oil seep through. You can get the clear ones to monitor the oil from the expediter http://www.expediter.com/pdf%20folder/B ... er/B14.pdf |
|
| Author: | colinj1 [ Wed May 29, 2013 4:55 pm ] |
| Post subject: | Re: 2013 four winns trailer |
thanks for the tip I will check the balance on the wheels and purchase new if needed |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|