www.iFourWinns.com
https://www.smwebhead.com/phpBB3/

Horizon 180 2004 - Trailer Bearing Size?
https://www.smwebhead.com/phpBB3/viewtopic.php?f=12&t=11704
Page 1 of 1

Author:  rebraun [ Sun Jun 02, 2013 2:56 pm ]
Post subject:  Horizon 180 2004 - Trailer Bearing Size?

Hi,

I have a 2004 Horizon 180 with the original Four Winns trailer (with disc brakes). Does anyone know what size replacement bearings I need?

Thanks!!

Author:  Aussie_Horizon_190 [ Sun Jun 02, 2013 8:41 pm ]
Post subject:  Re: Horizon 180 2004 - Trailer Bearing Size?

Single axle - 25580 Inner, 15123 Outer
Tandem axle - L68149 Inner, L44649 Outer

Not sure about the seal - FW list a 47017 for the single axle which I cant find an equiv. for, and a 17255 for the tandem

Best deal on these I found was http://www.championtrailers.com/

Author:  rebraun [ Mon Jun 03, 2013 3:29 pm ]
Post subject:  Re: Horizon 180 2004 - Trailer Bearing Size?

Thanks for your reply and information. I was able to find everything I need in a kit at champion for $15.95/per wheel. http://www.championtrailers.com/trailerbearingkits.html kit #218

The kit for my single axle trailer includes:
25580 1.75" - Inner Bearing
25520 - Inner Bearing Race
15123 1.25" - Outer Bearing
15245 - Outer Bearing Race
22333 3.37"-2.25" - Double Lip Seal
Cotter pin

I will order later today or tomorrow. If anyone happens to look at this and see anything that does not look right let me know!!!

Also, I had reached out to my nearest FW dealer and received this link - http://parts.fwdealer.com/. I was able to enter the VIN for my trailer and was presented with options to see details and part numbers for all components (brake assembly, axle assembly, wiring, etc....) of my trailer. A new site to me and an awesome find!!

Thanks and happy boating!

Author:  230 Mike [ Mon Jun 03, 2013 4:08 pm ]
Post subject:  Re: Horizon 180 2004 - Trailer Bearing Size?

rebraun wrote:

Also, I had reached out to my nearest FW dealer and received this link - http://parts.fwdealer.com/ ...


Now that's a great link! And one I have never seen.

Page 1 of 1 All times are UTC - 6 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/