| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Hubs and Hitches https://www.smwebhead.com/phpBB3/viewtopic.php?f=12&t=11967 |
Page 2 of 2 |
| Author: | LouC [ Thu Jul 25, 2013 7:55 am ] |
| Post subject: | Re: Hubs and Hitches |
With the super lube system, since there is only the pressure it takes to push the grease from the inner bearing to the outer one so it's not likely to blow seals. Ive had the same ones in there since I changed the axle back in '04. The way to do it is jack up that side and spin the wheel while greasing. |
|
| Author: | 230 Mike [ Thu Jul 25, 2013 9:40 am ] |
| Post subject: | Re: Hubs and Hitches |
Using a pneumatic gun, the chances of blowing the inner seals goes way up because the grease goes in much faster than it can push out. They say flat out not to ever use a pneumatic, but you can if you "pulse" it so that the grease gets some time to move. |
|
| Page 2 of 2 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|