www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
Re: Working on the new FW Aluminum I-Beam Trailer - FINISHED https://www.smwebhead.com/phpBB3/viewtopic.php?f=12&t=13467 |
Page 2 of 2 |
Author: | rpengr [ Wed Dec 02, 2015 8:37 am ] |
Post subject: | Re: Working on the new FW Aluminum I-Beam Trailer - FINISHED |
deafwish wrote: Oh & polish that hull - it's gross! Yes, I am ashamed. I'll try to make it look good in the final pictures. We spent a couple days in this coffee colored water of Lake Okeechobee and the Caloosahatchee River. That doesn't help: |
Author: | TFD2001 [ Thu Dec 03, 2015 7:21 am ] |
Post subject: | Re: Working on the new Aluminum I-Beam Trailer (new pics) |
Just curious, does the trailer have springs? Or is that torsion springs? Hard to tell? |
Author: | 97_245_sd [ Thu Dec 03, 2015 6:10 pm ] |
Post subject: | Re: Working on the new Aluminum I-Beam Trailer (new pics) |
rpengr wrote: We spent a couple days in this coffee colored water of Lake Okeechobee and the Caloosahatchee River. That doesn't help: I grew up in South Georgia. I didn't know that river and lake water looked like anything but really dark iced tea or coffee. That way you can't see the snakes and Gators coming to get you. |
Author: | rgoals2win [ Fri Apr 07, 2017 2:48 pm ] |
Post subject: | Re: Working on the new Aluminum I-Beam Trailer (new pics) |
rpengr wrote: Next week I'll be back to the detail work of installing: Lights Brake Lines Brakes Bow safety chain Fenders and supports Skid plates on cross bars Re-Adjust Bunk Brackets Re-check tightness of all bolts Hey Ray... I know it's been awhile since this thread was last used, but do you have any photos of the finished product...? Your work looks amazing...! Bob |
Author: | rpengr [ Thu Apr 13, 2017 1:57 pm ] |
Post subject: | Re: Working on the new Aluminum I-Beam Trailer (new pics) |
rgoals2win wrote: Hey Ray... I know it's been awhile since this thread was last used, but do you have any photos of the finished product...? Your work looks amazing...! Bob LOL, I still haven't finished it! Everything is done except applying the decals that I had made up. I have been using the trailer and it's been working great. I just recently installed the fenders, so I had taken these two photos. I plan to post more photos after clean it up and install the decals. One thing that is slowing me down, is that there is black soot embedded from torch heating the aluminum when making the bends. Simple green and some other cleaners did not succeed in cleaning up this black soot. Hoping I don't need to sand it off. Ray |
Author: | rgoals2win [ Thu Apr 13, 2017 4:11 pm ] |
Post subject: | Re: Working on the new Aluminum I-Beam Trailer (new pics) |
Thanks for the update, Ray...! I think you did a wonderful job. Fenders look really good. Decals will finish it off nicely. - Bob |
Author: | rpengr [ Fri Nov 17, 2017 10:37 am ] |
Post subject: | Re: Working on the new Aluminum I-Beam Trailer (new pics) |
. I finally "finished" my trailer project! Got around to adding the decals that I had made by a local sign shop. . Do I have the worlds only "Four Winns Aluminum I-Beam Trailer" ? . |
Author: | rgoals2win [ Fri Nov 17, 2017 12:52 pm ] |
Post subject: | Re: Working on the new FW Aluminum I-Beam Trailer - FINISHED |
OK, I am totally impressed. Looks excellent...! |
Author: | rpengr [ Fri Nov 17, 2017 1:00 pm ] |
Post subject: | Re: Working on the new FW Aluminum I-Beam Trailer - FINISHED |
rgoals2win wrote: OK, I am totally impressed. Looks excellent...! Thanks, Bob. The decals really make a huge difference in the look. |
Author: | LouC [ Fri Nov 17, 2017 3:17 pm ] |
Post subject: | Re: Working on the new FW Aluminum I-Beam Trailer - FINISHED |
Looks totally professionally done Ray! |
Author: | chris268 [ Fri Nov 17, 2017 5:49 pm ] |
Post subject: | Re: Working on the new FW Aluminum I-Beam Trailer - FINISHED |
Very nice job, the decals are the icing on the cake. |
Author: | 230 Mike [ Sun Nov 19, 2017 3:11 am ] |
Post subject: | Re: Working on the new FW Aluminum I-Beam Trailer - FINISHED |
Looks great!! |
Author: | rgoals2win [ Wed Nov 22, 2017 3:10 pm ] |
Post subject: | Re: Working on the new FW Aluminum I-Beam Trailer - FINISHED |
So the question now becomes, when will you start taking orders from those of us who live near salt water, Ray? |
Author: | SeriousRob [ Wed Jun 13, 2018 8:24 am ] |
Post subject: | Re: Working on the new FW Aluminum I-Beam Trailer - FINISHED |
Nice work. |
Page 2 of 2 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |