| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Wheel bearing size https://www.smwebhead.com/phpBB3/viewtopic.php?f=12&t=13569 |
Page 1 of 1 |
| Author: | C4 [ Fri Oct 17, 2014 4:58 am ] |
| Post subject: | Wheel bearing size |
Hi there, Am not in the USA, have a 2006 horizon 200 with double axle trailer. need to replace the wheel bearings but do not have the sizes. Due to possibly not being able to get the bearings here, I do not want to disassemble the hubs yet. Does anyone have the sizes for the bearings please. It is a 5 nut wheel hub. Thanks C4 |
|
| Author: | taz42169 [ Sat Oct 18, 2014 7:43 am ] |
| Post subject: | Re: Wheel bearing size |
C4, Need a little more information to help out. What size is the wheel (14 or 15 inch), what about the axle weight? With the additional information, I can probably give you a WAG (wild ass guess). Also, brakes or not... Thanks Tony |
|
| Author: | LouC [ Sat Oct 18, 2014 8:05 am ] |
| Post subject: | Re: Wheel bearing size |
If you look on the Four Winns website, under customer service, that information may be in the trailer specifications section. Usually 5 lug hubs have a 1750 lb capacity each for a total capacity of 3500 for the axle but in the past FW used a 5 lug hub with higher capacity bearings than normal so you have to check. |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|