www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
2006 Sundowner 215 Trailer Ball Size https://www.smwebhead.com/phpBB3/viewtopic.php?f=12&t=13946 |
Page 1 of 1 |
Author: | Russ [ Sun Apr 26, 2015 7:03 pm ] |
Post subject: | 2006 Sundowner 215 Trailer Ball Size |
I suspect it's a 2", but can't read it off the trailer anymore and thought someone here might know for sure. Thanks, |
Author: | Thalasso [ Sun Apr 26, 2015 8:58 pm ] |
Post subject: | Re: 2006 Sundowner 215 Trailer Ball Size |
Should be stamped on the coupler not the trailer |
Author: | EvilZ [ Sun Apr 26, 2015 9:47 pm ] |
Post subject: | Re: 2006 Sundowner 215 Trailer Ball Size |
Can you see a make/model on the brake actuator? If so, you should be able to figure out the correct ball size. A 2" ball is probably correct - it is on my '03 Funship 214. |
Author: | Russ [ Mon Apr 27, 2015 9:04 pm ] |
Post subject: | Re: 2006 Sundowner 215 Trailer Ball Size |
Thanks guys. Ya, can't read it off the coupler anymore. Will check the brake actuator and cross reference. Good idea. Cheers, Russ |
Author: | GottWhat [ Mon Apr 27, 2015 9:25 pm ] |
Post subject: | Re: 2006 Sundowner 215 Trailer Ball Size |
I would be surprised if it isn't 2". |
Author: | 230 Mike [ Tue Apr 28, 2015 1:19 am ] |
Post subject: | Re: 2006 Sundowner 215 Trailer Ball Size |
They were 2 5/16" through 2004, then switched to 2" in early 2005. |
Author: | svenhalen [ Thu Mar 31, 2016 11:09 am ] |
Post subject: | Re: 2006 Sundowner 215 Trailer Ball Size |
I have a 2006 sundowner 215 and it is indeed a 2 inch ball. |
Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |