Bill. Does that help?
Actually I've got his e-mail address around here somewhere...
| www.iFourWinns.com https://www.smwebhead.com/phpBB3/ |
|
| Trailer crossmember replacement?? https://www.smwebhead.com/phpBB3/viewtopic.php?f=12&t=146 |
Page 1 of 1 |
| Author: | BerndM [ Tue Jun 20, 2006 11:08 pm ] |
| Post subject: | Trailer crossmember replacement?? |
Hi Has anyone here ever replaced an entire crossmember on their trailer?? If so, did you have it made or buy it from Four Winns? Thanks Bernd |
|
| Author: | scottwood2 [ Wed Jun 21, 2006 8:30 am ] |
| Post subject: | |
I have not but the trailer engineering division of FW is quite helpful. You may want to give them a call or talk to your dealer. He may be able to order the part. |
|
| Author: | BerndM [ Wed Jun 21, 2006 11:58 am ] |
| Post subject: | |
scottwood2 wrote: I have not but the trailer engineering division of FW is quite helpful. You may want to give them a call or talk to your dealer. He may be able to order the part.
Hi Scott I gave them a call this morning but it seems that most of their people are out at a boat show somewhere. I'll call them back next week and ask. Thanks Regards Bernd |
|
| Author: | 230 Mike [ Wed Jun 21, 2006 12:15 pm ] |
| Post subject: | |
FW is having their big annual dealer meetings this week. Anybody who's anybody there is unavailable until at least this Friday, more likely next week. |
|
| Author: | teker [ Wed Jun 21, 2006 9:05 pm ] |
| Post subject: | |
There was a poster on the Yahoo board who worked in the trailer plant. Wish we could get him to join up here. Any one remember his name? |
|
| Author: | 230 Mike [ Wed Jun 21, 2006 9:54 pm ] |
| Post subject: | |
Bill. Does that help?
Actually I've got his e-mail address around here somewhere... |
|
| Author: | teker [ Thu Jun 22, 2006 9:24 am ] |
| Post subject: | |
His name is Bill. Here's is his Email. I had saved it from the Yahoo forum. Lets recruit him. bill_48632@yahoo.com |
|
| Author: | BerndM [ Tue Jun 27, 2006 9:46 am ] |
| Post subject: | |
teker wrote: His name is Bill. Here's is his Email. I had saved it from the Yahoo forum. Lets recruit him.
bill_48632@yahoo.com Hey Guys Thanks for your comments here. I contacted Bill at Four Winns and he informed me that they would have no way of supplying me with a subcomponent such as the rear crossmember. His suggestion, which I sort of already assumed, was to have a metal shop build me a new crossmember, which is what I am having done. Oh well, it certainly didn't hurt to try... Regards Bernd |
|
| Page 1 of 1 | All times are UTC - 6 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|